Le suucès n'est pas loin de vous une fois que vous choisissez le produit de Q&A Motorola Solutions MSC-241 de Pass4Test.
Nous assurons seulement le succès de test certification, mais encore la mise à jour est gratuite pour vous. Si vous ne pouvez pas passer le test, votre argent sera 100% rendu. Toutefois, cette possibilité n'est presque pas de se produire. Vous pouvez tout d'abord télécharger le démo gratuit pour prendre un essai.
C'est un bon choix si vous prendre l'outil de formation de Pass4Test. Vous pouvez télécharger tout d'abord le démo gratuit pour prendre un essai. Vous aurez plus confiances sur Pass4Test après l'essai de notre démo. Si malheureusement, vous ne passe pas le test, votre argent sera tout rendu.
Code d'Examen: MSC-241
Nom d'Examen: Motorola Solutions (Design and Deploy for MOTOTRBO Solutions EMEA)
Questions et réponses: 108 Q&As
Un bon choix de l'outil à se former est le point essentiel à passer le test Motorola Solutions MSC-241, et les documentations à propos de rechercher le test Motorola Solutions MSC-241 est toujours une part plus importante pendant la préparation de test Certification. Les Q&As offertes par les experts de Pass4Test sont presque même que les tests réels. Pass4Test est un site web particulièrement en apportant les facilités aux gens qui veulent passer le test Certification.
Aujourd'hui, il y a pleine de professionnels IT dans cette société. Ces professionnels sont bien populaires mais ils ont à être en face d'une grande compétition. Donc beaucoup de professionnels IT se prouver par les tests de Certification très difficile à réussir. Pass4Test est voilà pour offrir un raccourci au succès de test Certification.
Certification Motorola Solutions MSC-241 est un des tests plus importants dans le système de Certification Motorola Solutions. Les experts de Pass4Test profitent leurs expériences et connaissances professionnelles à rechercher les guides d'étude à aider les candidats du test Motorola Solutions MSC-241 à réussir le test. Les Q&As offertes par Pass4Test vous assurent 100% à passer le test. D'ailleurs, la mise à jour pendant un an est gratuite.
Pass4Test a de formations plus nouvelles pour le test Motorola Solutions MSC-241. Les experts dans l'industrie IT de Pass4Test profitant leurs expériences et connaissances professionnelles à lancer les Q&As plus chaudes pour faciliter la préparation du test Motorola Solutions MSC-241 à tous les candidats qui nous choisissent. L'importance de Certification Motorola Solutions MSC-241 est de plus en plus claire, c'est aussi pourquoi il y a de plus en plus de gens qui ont envie de participer ce test. Parmi tous ces candidats, pas mal de gens ont réussi grâce à Pass4Test. Ces feedbacks peuvent bien prouver nos produits essentiels pour votre réussite de test Certification.
MSC-241 Démo gratuit à télécharger: http://www.pass4test.fr/MSC-241.html
NO.1 On which type of channel in an IP Site Connect system are Transmit Interrupt features
supported
in repeater firmware releases R01.08.00 and higher?
A. Wide Area Slots only
B. Local Area Slots only
C. Both Wide and Local Area slots
D. Noneoftheabove
Answer: D
Motorola Solutions examen MSC-241 MSC-241 MSC-241
NO.2 Which of the following are TRUE statements about operating a MOTOTRBO repeater in a
Capacity Plus configuration?
A. One of its logical channels can work in trunked mode and the other logical channel can work in
data revert mode.
B. Both logical channels can work in trunked mode.
C. Both logical channels can work in data revert mode.
D. Only A & B are true (C is false)
E. Only B & C are true (A is false)
F. A, B, & C are true
Answer: F
certification Motorola Solutions certification MSC-241 certification MSC-241 MSC-241 examen
NO.3 What will Enhanced Channel Access improve?
A. The amount of GPS updates that can be sent on a data revert channel
B. The amount of time from when PTT is pressed until voice is sent
C. Call success rate
D. Call setup time
Answer: C
Motorola Solutions certification MSC-241 certification MSC-241
NO.4 A Capacity Plus system consists of three (3) repeaters with repeater one (1) the master and
repeaters two (2) and three (3) as peers. The dealer needs to make a simple change in repeater
two (2) and utilize IP repeater programming (IRP) to access the repeater remotely. A couple of
days later the customer calls and complains about users getting system busy tones (engaged
tones).
The dealer attempts to connect an RDAC remotely to the system with no success. He has verified
he can communicate to the router at the site.
Which of the following statements BEST describes the issue?
A. The master has gone down and taken the rest of the Capacity Plus network with it.
B. The master has gone down and the system is operating on just two (2) repeaters.
C. There is RF interference on the channel and the master repeater is unable to communicate to
the peers.
D. The peers are using DHCP and are not able to connect to the master and refresh their peer list.
The system is operating on just the master.
Answer: B
Motorola Solutions examen MSC-241 examen certification MSC-241 certification MSC-241
NO.5 You are looking to optimize battery life of radios that are close to the base station. Which is
the
most likely parameter for optimizing the battery life of a radio for a Capacity Plus system?
A. Beacon interval
B. Beacon duration
C. High power mode in Radio
D. Low power mode in Radio
Answer: D
certification Motorola Solutions MSC-241 MSC-241 examen MSC-241
NO.6 A Capacity Plus system consists of three (3) repeaters with repeater one (1) the master and
repeaters two (2) and three (3) as peers. On the 24th of May, there is a lighting strike at the site
and the building lost power, causing the three repeaters to revert to DC power. The design of the
site called for just the repeaters to be battery backed. However the next morning the customer
calls and reports that a number of talkgroups are getting busy tones (engaged), yet other groups
are seeing no busy tones (engaged) on the system. Which of the following statements BEST
describe the issue?
A. The master has gone down and taken the rest of the Capacity Plus network with it.
B. The peers use DHCP and were not able to connect to the master and refresh their peer list and
went off the Capacity Plus network as their leases expired.
C. The switch was not on battery backup and there are no LAN connections on the Capacity Plus
system, each of the repeaters are now operating as three (3) independent Capacity Plus systems.
D. The peers use DHCP and were not able to connect to the master and refresh their peer list.
The dealer should have used static IP addresses throughout.
Answer: C
Motorola Solutions MSC-241 MSC-241 examen MSC-241 MSC-241 examen certification MSC-241
NO.7 A MOTOTRBO repeater is connected to a Zetron Model 35 Telephone Interconnect. If a
telephone
user dials the Telephone Interconnect number, they get a busy signal (engaged tone). If a radio
user dials any telephone number, they don’t hear the ringing tone, only silence. Upon visiting the
site, you find that when a radio user dials, the relay click can be heard from the Zetron Model 35.
Unplugging the RJ11 and dialing the Telephone Interconnect, still results in a busy signal
(engaged tone). With this information, what do you think could be wrong?
A. The Zetron Model 35 may be faulty.
B. The Zetron Model 35 has probably not been configured for the phone line Ringer Equivalence
Number (REN).
C. The RJ11 cable may have a short circuit or there is a short circuit somewhere between the site
and the exchange.
D. The repeater interface cable to the Zetron Model 35 is faulty.
Answer: C
certification Motorola Solutions MSC-241 MSC-241
NO.8 Which of the following are TRUE statements about operating a MOTOTRBO repeater in an IP
Site
Connect configuration?
A. One of its logical channels can work in IP Site Connect mode (over wide area) and the other
logical channel can work in digital repeater mode (single site over local area).
B. Both logical channels can work in digital repeater mode (single site over local area).
C. Both logical channels can work in IP Site Connect mode (over wide area).
D. Only A and B are true (C is false).
E. Only A and C are true (B is false).
F. A, B, and C are true.
Answer: F
Motorola Solutions examen MSC-241 examen MSC-241 MSC-241 examen
NO.9 What changes are required to the Master Repeater in an IP Site Connect system when a new
peer
is added to the system?
A. Both the IP address and port number of the new repeater must be configured into the Master
Repeater.
B. The address of the new peer must be configured into the Master Repeater.
C. The port of the new peer must be configured into the Master Repeater.
D. No changes are required to the Master Repeater.
Answer: D
Motorola Solutions certification MSC-241 MSC-241 examen MSC-241
NO.10 Which of the following antennas is BEST suited for providing coverage inside a tall building?
A. 4 element Yagi
B. Radiating coaxial cable
C. End-fed half-wave antenna
D. High gain collinear antenna
Answer: B
Motorola Solutions MSC-241 certification MSC-241 certification MSC-241 MSC-241 examen certification MSC-241
Pass4Test est un site professionnel qui répondre les demandes de beaucoup clients. Les candidats qui ont déjà passer leurs premiers test Certification IT ont devenus les suivis de Pass4Test. Grâce à la bonne qualité des documentations, Pass4Test peut aider tous candidats à réussir le test Motorola Solutions MSC-241.