Pass4Test est un catalyseur de votre succès de test Juniper JN0-101. En visant la Certification de Juniper, la Q7A de Pass4Test avec beaucoup de recherches est lancée. Si vous travillez dur encore juste pour passer le test Juniper JN0-101, la Q&A Juniper JN0-101 est un bon choix pour vous.
Si vous voulez ne se soucier plus à passer le test Juniper JN0-101, donc vous devez prendre la Q&A de Pass4Test comme le guide d'étude pendant la préparation de test Juniper JN0-101. C'est une bonne affaire parce que un petit invertissement peut vous rendre beaucoup. Utiliser la Q&A Juniper JN0-101 offerte par Pass4Test peut vous assurer à réussir le test 100%. Pass4Test a toujours une bonne réputation dans l'Industrie IT.
Pass4Test vous offre un choix meilleur pour faire votre préparation de test Juniper JN0-101 plus éfficace. Si vous voulez réussir le test plus tôt, il ne faut que ajouter la Q&A de Juniper JN0-101 à votre cahier. Pass4Test serait votre guide pendant la préparation et vous permet à réussir le test Juniper JN0-101 sans aucun doute. Vous pouvez obtenir le Certificat comme vous voulez.
Code d'Examen: JN0-101
Nom d'Examen: Juniper (JNCIA-JUNOS EXAM OBJECTIVES)
Questions et réponses: 190 Q&As
Aujourd'hui, c'est une société pleine de gens talentueux, la meilleure façon de suivre et assurer la place dans votre carrière est de s'améliorer sans arrêt. Si vous n'augmentez pas dans votre carrière, vous êtes juste sous-développé parce que les autres sont meilleurs que vous. Pour éviter ce cas, vous devez vous former successivement.
JN0-101 Démo gratuit à télécharger: http://www.pass4test.fr/JN0-101.html
NO.1 Which account is used to access a Junos device in a factory-default configuration?
A.root
B.admin
C.juniper
D.user
Answer: A
Juniper examen JN0-101 examen certification JN0-101
NO.2 Whitch three user authentication methos are supported by the Junos OS? (Choose three)
A.RADIUS
B.CHAP
C.local user database
D.tacacs+
E.PAP
Answer: ACD
Juniper JN0-101 JN0-101
NO.3 Which command do you use to go from the shell prompt to the CLI prompt.?
A.run cli
B.cli
C.start cli
D.edit
Answer: B
certification Juniper certification JN0-101 JN0-101 examen JN0-101 examen
NO.4 You have been asked to create a static route with a next hop that is not directly connected to the
router.Which configuration parameter enables the static route to accomplish this scenario?
A.resolve
B.indirect
C.next-hop
D.recursive
Answer: A
Juniper JN0-101 certification JN0-101 JN0-101 JN0-101
NO.5 You are the top of hierarchy and must configure OSPF on inteface so-0/0/0 unit 100.Which two
achieve this result? (Choose two)
A.set protocols set ospf area 0 set interface so-0/0/0.100
B.set protocols ospf area 0 interface so-0/0/0.100
C.edit protocols ospf interface so-0/0/0.100
D.edit protocols ospf area 0 set interface so-0/0/0.100
Answer: BD
Juniper examen JN0-101 JN0-101 JN0-101 JN0-101 examen
NO.6 Referring to the exhibit, which type of classifier is being used in this CoS configuration?
[edit fireall family inet filter COS-CLASSIFIER]
user@router# show
term MANAGER {
form {
soruce-address {
192.168.200.0/25;
}
destination-address {
100.100.100.1/32;
}
}
then {
forwarding-class expedited-forwarding;
accept;
}
}
term ALL-OTHER-TRAFFIC {
then accept;
}
[edit interfaces ge-0/0/1]
user@router# show
unit 0 {
family inet {
filter {
input COS-CLASSIFIER
}
address 192.168.200.1/24;
}
}
A.behavior aggregate
B.policer
C.multifield
D.forward policy
Answer: C
Juniper JN0-101 JN0-101 certification JN0-101
NO.7 When using the monitor traffic command on Junos devices, which UNIX-based utility is accessed?
A.snoop
B.tcpdump
C.monitor
D.tail
Answer: C
Juniper examen JN0-101 examen JN0-101 JN0-101
NO.8 You need to control SSH, HTTP, and Telnet access to an MX240 router through any interface.You have
decided to use a firewall filter.How should you apply the firewall filter?
A.as an outbound filter on interface fxp0
B.as an outbound filter on interface lo0
C.as an inbound filter on interface fxp0
D.as an inbound filter on interface lo0
Answer: D
Juniper JN0-101 examen JN0-101 JN0-101 examen JN0-101
NO.9 What is the default protocol preference for OSPF internal routes?
A.10
B.15
C.150
D.160
Answer: A
Juniper examen JN0-101 examen JN0-101 examen JN0-101
NO.10 Which three protocols use UDP as a transport protocol by default? (Choose three)
A.HTTP
B.TFTP
C.DNS
D.SNMP
E.SMTP
Answer: BCD
Juniper JN0-101 examen JN0-101 examen
NO.11 Given the routing entries shown in the exhibit, which next-hop IP address will be used for the
destination IP address 192.168.1.142? (Assume that only static routes are available for the destination)
A.10.20.106.10
B.10.20.14.131
C.10.18.1.1
D.10.20.14.130
Answer: D
Juniper JN0-101 examen JN0-101 certification JN0-101 JN0-101
NO.12 What represents the binary equivalence of 207?
A.11001111
B.11101011
C.11010111
D.11010101
Answer: A
certification Juniper JN0-101 JN0-101 JN0-101 examen
NO.13 Which two statements are true about the forwarding table? (Choose two)
A.The forwarding table lists each source protocol and preference for each destination
B.The forwarding table constains only active routes
C.The forwarding table is used to process transit packets
D.The forwarding table is stored in compact flash
Answer: BC
certification Juniper certification JN0-101 JN0-101 certification JN0-101 certification JN0-101
NO.14 Given the configuration and routing table in the exhibit, which routes will be advertised to OSPF
neighbors because of the demo policy?
A.192.168.0.0/16 only
B.192.168.0.0/17 only
C.192.168.50.0/24 and 192.168.51.0/24
D.192.168.0.0/17, 192.168.50.0/24 and 192.168.51.0/24
Answer: D
Juniper certification JN0-101 JN0-101 JN0-101 examen certification JN0-101
NO.15 You issue the ping interface t1-1/1/0 1.1.1.1 bypass-routing count 1000 rapid command
Which statement is correct?
A.The bypass-routing parameter is used to test the density on the T1 line
B.The bypass-routing parameter cannot be used on a T1 interface
C.The bypass-routing parameter allows you to ping a host through an interface that has no route through
it
D.The bypass-routing parameter allows you to ping a local WAN interface without generating any
outbound traffic
Answer: C
Juniper JN0-101 JN0-101 JN0-101 JN0-101 examen
NO.16 Which two statements are true about the rescue configuration file? (Choose two)
A.It must include a root password
B.It is roll back file number 50, and you can recover it by issuing rollback 50
C.It is created by issuing request system configuration rescue save
D.It is updated automatically when you commit
Answer: AC
certification Juniper JN0-101 JN0-101 examen
NO.17 What is the default import routing for OSPF?
A.Accept all OSPF routes and install them into the 3 routing table
B.Accept all OSPF routes and install them into the inet7.0 routing table
C.Accept all OSPF routes and install them into the inet4.0 routing table
D.Accept all OSPF routes and install them into the inet.0 routing table
Answer: D
Juniper JN0-101 certification JN0-101
NO.18 Referring to the exhibit,
which two statements are true? (Choose two)
A.The route 192.168.1.0/25 is accepted
B.The route 192.168.2.0/25 is accepted
C.OSPF routes will be exported into RIP
D.RIP routes will be exported into OSPF
Answer: AD
Juniper JN0-101 examen JN0-101 examen
NO.19 What must be configured prior to the first commit after factory defaults are loaded?
A.root authentication
B.default gateway
C.hostname
D.management services
Answer: A
Juniper examen certification JN0-101 JN0-101 examen certification JN0-101 JN0-101 examen
NO.20 What are two valid match criteria for a routing policy? (Choose two)
A.OSPF area ID
B.prefix list
C.port
D.time-to-live (TTL)
Answer: AB
Juniper examen JN0-101 examen JN0-101 examen JN0-101 certification JN0-101
On peut télécharger quelques parties de Q&A gratuites dans le site Pass4Test à propos de test Certification Juniper JN0-101. Vous pouvez tester notre fiabilité via le démo. Choisir Pass4Test, c'est-à-dire que vous êtes proche d'un pic ensuite de l'Industrie IT.
没有评论:
发表评论