Le meilleur matériel de formation examen Alcatel-Lucent 4A0-M01 4A0-M02 4A0-106 4A0-109 4A0-108

Nous croyons que pas mal de candidats voient les autres site web qui offrent les ressources de Q&A Alcatel-Lucent 4A0-M01 4A0-M02 4A0-106 4A0-109 4A0-108. En fait, le Pass4Test est le seul site qui puisse offrir la Q&A recherchée par les experts réputés dans l'Industrie IT. Grâce à la Q&A de Pass4Test impressionée par la bonne qualité, vous pouvez réussir le test Alcatel-Lucent 4A0-M01 4A0-M02 4A0-106 4A0-109 4A0-108 sans aucune doute.

L'équipe de Pass4Test autorisée offre sans arrêt les bonnes resources aux candidats de test Certification Alcatel-Lucent 4A0-M01 4A0-M02 4A0-106 4A0-109 4A0-108. Les documentations particulièrement visée au test Alcatel-Lucent 4A0-M01 4A0-M02 4A0-106 4A0-109 4A0-108 aide beaucoup de candidats. La Q&A de la version plus nouvelle est lancée maintenant. Vous pouvez télécharger le démo gratuit en Internet. Généralement, vous pouvez réussir le test 100% avec l'aide de Pass4Test, c'est un fait preuvé par les professionnels réputés IT. Ajoutez le produit au panier, vous êtes l'ensuite à réussir le test Alcatel-Lucent 4A0-M01 4A0-M02 4A0-106 4A0-109 4A0-108.

Chaque expert dans l'équipe de Pass4Test ont son autorité dans cette industrie. Ils profitent ses expériences et ses connaissances professionnelles à préparer les documentations pour les candidats de test Certification IT. Les Q&As produites par Pass4Test ont une haute couverture des questions et une bonne précision des réponses qui vous permettent la réussie de test par une seule fois. D'ailleurs, un an de service gratuit en ligne après vendre est aussi disponible pour vous.

La partie plus nouvelle de test Certification Alcatel-Lucent 4A0-M01 4A0-M02 4A0-106 4A0-109 4A0-108 est disponible à télécharger gratuitement dans le site de Pass4Test. Les exercices de Pass4Test sont bien proches de test réel Alcatel-Lucent 4A0-M01 4A0-M02 4A0-106 4A0-109 4A0-108. En comparaison les Q&As dans les autres sites, vous trouverez que les nôtres sont beaucoup plus complets. Les Q&As de Pass4Test sont tout recherchés par les experts de Pass4Test, y compris le test simulation.

Code d'Examen: 4A0-M01
Nom d'Examen: Alcatel-Lucent (Alcatel-Lucent IP/MPLS Mobile Backhaul Transport)
Questions et réponses: 150 Q&As

Code d'Examen: 4A0-M02
Nom d'Examen: Alcatel-Lucent (Alcatel-Lucent Mobile Gateways for the LTE Evolved Packet Core )
Questions et réponses: 140 Q&As

Code d'Examen: 4A0-106
Nom d'Examen: Alcatel-Lucent (Alcatel-Lucent Virtual Private Routed Networks)
Questions et réponses: 61 Q&As

Code d'Examen: 4A0-109
Nom d'Examen: Alcatel-Lucent (Alcatel-Lucent Triple Play Services)
Questions et réponses: 60 Q&As

Code d'Examen: 4A0-108
Nom d'Examen: Alcatel-Lucent (Alcatel-Lucent Multicast Protocols)
Questions et réponses: 122 Q&As

4A0-M01 Démo gratuit à télécharger: http://www.pass4test.fr/4A0-M01.html

NO.1 Click on the exhibit.
Given the show command results shown:
Which IEEE 1588v2/Precision Time Protocol (PTP) v2 parent clock value does the slave first consider
when choosing its master?
A. GM Clock Priority1
B. GM Clock ID
C. GM Clock Priority2
D. GM Clock Class
Answer: D

Alcatel-Lucent examen   4A0-M01   4A0-M01   4A0-M01   4A0-M01

NO.2 Which statement best describes adaptive timing techniques?
A. Adaptive timing calculates the time of day from time stamped packets
B. Adaptive timing calculates the time of day from the arriving packet rate
C. Adaptive timing only supports frequency synchronization
D. Adaptive timing only operates on point-to-point links
Answer: A

Alcatel-Lucent   4A0-M01 examen   4A0-M01

NO.3 Click on the exhibit.
Given the show command results shown:
With what IEEE 1588v2/Precision Time Protocol (PTP) v2 message did the slave node set the Unicast
message rates used by the master?
A. Announce granted
B. Announce request
C. Sync granted
D. Sync request
Answer: B

Alcatel-Lucent examen   4A0-M01   4A0-M01   certification 4A0-M01   4A0-M01

NO.4 Click on the exhibit.
Given the configuration shown and the following conditions:
* The external reference is offline
* Reference 1 receives Quality Level (QL) - EEC1
* Reference 2 receives QL - SSU-A
Which quality level will the SAR router advertise to its Synchronous Ethernet (SyncE) peers?
A. QL-DNU
B. QL-EEC1
C. QL-SSU-A
D. QL-PRC
E. QL-UNC
Answer: B

Alcatel-Lucent   certification 4A0-M01   certification 4A0-M01   certification 4A0-M01

NO.5 Which synchronization technique supports time of day and phase synchronization?
A. IEEE 1588 v2/Precision Time Protocol (PTP)v2
B. Adaptive Clock Recovery (ACR)
C. Time Division Multiplexing (TDM) line timing
D. Synchronization Ethernet (SyncE)/Synchronization Status Message (SSM)
Answer: A

Alcatel-Lucent examen   4A0-M01 examen   4A0-M01

NO.6 When researching carrier-class Ethernet standards to support the mobile backhaul Ethernet transport,
which standards body would you consult?
A. IEEE
B. MEF
C. ITU-T
D. NGMN
Answer: B

Alcatel-Lucent examen   4A0-M01   4A0-M01   4A0-M01 examen   certification 4A0-M01

NO.7 Click on the exhibit.
Given the following:
On the OC-3 port, each provisioned channel group contains all available timeslots.
The command result illustrates which circuit status?
A. The E1 channel group is administratively turned down
B. The DS1 circuit physical link is operationally down
C. The IMA bundle has no operational member links
D. The associated Layer 3 interface is operationallydown
Answer: B

Alcatel-Lucent   4A0-M01   certification 4A0-M01   4A0-M01 examen

NO.8 In the Alcatel-Lucent SROS, which command creates the OC-3 path's Administrative Unit (AU)-4 Virtual
Container (VC) capacity?
A. configure port 3/1/2 sonet-sdh path au-4
B. configure port 3/1/2 sonet-sdh path sts3
C. configure port 3/1/2 sonet-sdh path tug-3
D. configure port 3/1/2 sonet-sdh path vc-4
Answer: B

certification Alcatel-Lucent   4A0-M01   4A0-M01   4A0-M01 examen

NO.9 Which is a characteristic of the IEEE 802.3 Slow Protocol?
A. There are a maximum of 10 frames transmitted per second
B. There are a maximum of 20 slow protocol subtypes per interface
C. The maximum slow protocol frame size is 64 bytes
D. The slow protocol header carries the clock quality level
Answer: A

Alcatel-Lucent   4A0-M01   4A0-M01

NO.10 If an IEEE 1588v2/Precision Time Protocol (PTP) v2 slave times out announce messages with the
master, to which state does the slave port transition to choose another potential master?
A. Initial
B. Listening
C. Passive
D. Un-calibrated
Answer: B

certification Alcatel-Lucent   4A0-M01   4A0-M01   certification 4A0-M01

NO.11 Click on the exhibit.
Consider the topology and MLS1 configuration shown, and given the following conditions:
-MLS1 delivers the PRC traceable clock to the network
-Reference 1 receives Quality Level (QL) - ST3
-Reference 2 receives QL - DUS
-BITS sets QL-STU
Which quality level will MLS1 deliver to POC2-1 on its Synchronous Ethernet (SyncE) port 1/2/7?
A. QL-EEC2
B. QL-PRS
C. QL-ST3
D. QL-STU
Answer: C

Alcatel-Lucent examen   4A0-M01   4A0-M01   4A0-M01

NO.12 Which timing technique can deliver time of day and phase synchronization information to the base
station without concern for Packet Delay Variation (PDV)?
A. Building Integrated Timing Supply (BITS)
B. Global Positioning System (GPS)
C. Adaptive Clock Recovery (ACR)
D. IEEE 1588v2/Precision Time Protocol (PTP)
Answer: B

Alcatel-Lucent   certification 4A0-M01   certification 4A0-M01   4A0-M01 examen

NO.13 Which messages, periodically sent between an IEEE 1588v2/Precision Time Protocol (PTP) v2 master
and slave, serve as hellos to help the slave choose the best available master?
A. Announce
B. Announce_grant
C. Sync
D. Delay_response
Answer: A

certification Alcatel-Lucent   4A0-M01   4A0-M01 examen

NO.14 An SROS router obtains its timing exclusively from its BITS input port. The router sets Quality Level
(QL) SONET Traceability Unknown (STU) on this Superframe (SF) framed DS1 BITS reference.
What must you configure on this master router to pass the best clock quality level to the downstream
Synchronous Ethernet (SyncE) slave nodes while maintaining traceability to the DS1 source?
A. Enable "ql-override prs" on the BITS reference
B. Enable "ql-override prs" on the master's SyncE ports
C. Enable "ql-selection prs" on the BITS reference
D. Set the master router to choose its source by quality level
Answer: A

certification Alcatel-Lucent   4A0-M01   4A0-M01

NO.15 Click on the exhibit.
On the OC-3 port, each provisioned channel group contains all available timeslots
The command result illustrates which OC-3 port characteristic?
A. On STS1-1,the second VT1.5 in the second VTG is set for IPCP encapsulation
B. On STS1-1,the second DS1 channel group in the second VTG isoperationallyup
C. On STS1-1, the second E1 channel group in the second TUG-2 is operationally up
D. On STS1-1, the second VT2 in the second TUG-2 is set for IPCP encapsulation
Answer: C

certification Alcatel-Lucent   4A0-M01   4A0-M01   4A0-M01   4A0-M01

NO.16 In the Alcatel-Lucent SROS, which payload type set in a SDH-framed OC-12 port creates individual E1
containers?
A. Virtual Tributary (VT) 1.5
B. VT2
C. Virtual Container (VC)-11
D. VC-12
Answer: B

certification Alcatel-Lucent   4A0-M01   4A0-M01   4A0-M01 examen   4A0-M01 examen   4A0-M01 examen

NO.17 Which statement correctly describes the Point-to-Point (PPP) Multilink Protocol (MP) negotiation
process?
A. At least one link must complete Link Control Protocol (LCP) negotiations before the bundle can
initialize
B. The endpoints indicate their desire to implement MP in the link Network Control Protocol (NCP) phase
C. The bundle must complete LCP negotiations before it can enter the NCP negotiation phase
D. Internet Protocol-Control Protocol (IPCP) negotiations must succeed for the bundle links to initialize
Answer: A

Alcatel-Lucent   certification 4A0-M01   certification 4A0-M01   4A0-M01

NO.18 The IETF is know for which standardization effort.?
A. It develops recommendations for core network functionality, broadband service delivery and next
generation services
B. It maintains Requests for Comment (RFC) that describe technical solutions to Internet challenges
C. It creates single, integrated network design guidelines to support mobile broadband services
D. It develops radio access services and systems for high capacity mobile networks
Answer: B

Alcatel-Lucent examen   4A0-M01   4A0-M01

NO.19 Click on the exhibit.
The command result indicates which condition on the Inverse Multiplexing over ATM (IMA) bundle?
A. The number of active links has dropped belowthe minimum threshold
B. The associated Layer 3 interface is administratively down
C. The remote IMA bundle is administrativelydown
D. The parent OC-3 is operationally down
Answer: C

certification Alcatel-Lucent   4A0-M01   4A0-M01

NO.20 Click on the exhibit.
Consider the topology and MLS1 configuration shown, and given the following conditions:
* MLS1 delivers the PRC traceable clock to the network
* Reference 1 receives Quality Level (QL) - EEC1
* Reference 2 receives QL - SSU-A
* BITS sets QL-SSU-B
Which quality level will MLS1 deliver to POC2-1 on its Synchronous Ethernet (SyncE) port 1/2/7?
A. QL-EEC1
B. QL-PRC
C. QL-SSU-A
D. QL-STU
Answer: B

Alcatel-Lucent   certification 4A0-M01   certification 4A0-M01   4A0-M01   certification 4A0-M01

4A0-M02 dernières questions d'examen certification Alcatel-Lucent et réponses publiés

Pass4Test vous permet à réussir le test Certification sans beaucoup d'argents et de temps dépensés. La Q&A Alcatel-Lucent 4A0-M02 est recherchée par Pass4Test selon les résumés de test réel auparavant, laquelle est bien liée avec le test réel.

Choisir le produit fait avec tous efforts des experts de Pass4Test vous permet à réussir 100% le test Certification IT. Le produit de Pass4Test est bien certifié par les spécialistes dans l'Industrie IT. La haute qualité du produit Pass4Test ne vous demande que 20 heures pour préparer, et vous allez réussir le test Alcatel-Lucent 4A0-M02 à la première fois. Vous ne refuserez jamais pour le choix de Pass4Test, parce qu'il symbole le succès.

Votre vie changera beaucoup après d'obtenir le Certificat de Alcatel-Lucent 4A0-M02. Tout va améliorer, la vie, le boulot, etc. Après tout, Alcatel-Lucent 4A0-M02 est un test très important dans la série de test Certification Alcatel-Lucent. Mais c'est pas facile à réussir le test Alcatel-Lucent 4A0-M02.

Si vous voulez ne se soucier plus à passer le test Alcatel-Lucent 4A0-M02, donc vous devez prendre la Q&A de Pass4Test comme le guide d'étude pendant la préparation de test Alcatel-Lucent 4A0-M02. C'est une bonne affaire parce que un petit invertissement peut vous rendre beaucoup. Utiliser la Q&A Alcatel-Lucent 4A0-M02 offerte par Pass4Test peut vous assurer à réussir le test 100%. Pass4Test a toujours une bonne réputation dans l'Industrie IT.

Pass4Test peut offrir la facilité aux candidats qui préparent le test Alcatel-Lucent 4A0-M02. Nombreux de candidats choisissent le Pass4Test à préparer le test et réussir finalement à la première fois. Les experts de Pass4Test sont expérimentés et spécialistes. Ils profitent leurs expériences riches et connaissances professionnelles à rechercher la Q&A Alcatel-Lucent 4A0-M02 selon le résumé de test réel Alcatel-Lucent 4A0-M02. Vous pouvez réussir le test à la première fois sans aucune doute.

Il y a plusieurs de façons pour réussir le test Alcatel-Lucent 4A0-M02, vous pouvez travailler dur et dépenser beaucoup d'argents, ou vous pouvez travailler plus efficacement avec moins temps dépensés.

Code d'Examen: 4A0-M02
Nom d'Examen: Alcatel-Lucent (Alcatel-Lucent Mobile Gateways for the LTE Evolved Packet Core )
Questions et réponses: 140 Q&As

Aujoud'hui, dans cette indutrie IT de plus en plus concurrentiel, le Certificat de Alcatel-Lucent 4A0-M02 peut bien prouver que vous avez une bonne concurrence et une space professionnelle plus grande à atteindre. Dans le site Pass4Test, vous pouvez trouver un outil de se former très pratique. Nos IT experts vous offrent les Q&As précises et détaillées pour faciliter votre cours de préparer le test Alcatel-Lucent 4A0-M02 qui vous amenera le succès du test Alcatel-Lucent 4A0-M02, au lieu de traivailler avec peine et sans résultat.

4A0-M02 Démo gratuit à télécharger: http://www.pass4test.fr/4A0-M02.html

NO.1 Which of the following statements is FALSE regarding the S1-MME interface?
A. It is the control plane interface between the E-UTRAN and the MME.
B. It is used to signal the TEIDs for the S1 bearers between the eNodeB and the SGW.
C. The eNodeB receives the Paging messages over the S1-MME interface.
D. It is used for the management of the Radio Access Bearers.
E. It is based on the IP/UDP protocols.
Answer: E

Alcatel-Lucent   4A0-M02 examen   4A0-M02   4A0-M02   4A0-M02

NO.2 Which of the following statements most accurately describes the MME?
A. The MME selects the SGW and the PGW for a given UE.
B. The MME is responsible for the bearer management.
C. The MME communicates with both the E-UTRAN and the EPC via GTP-C tunnels.
D. The MME performs the user authentication and authorization using the information provided by the
HSS
E. All of the above answers are correct.
F. Only answers A, B and D are correct.
Answer: F

Alcatel-Lucent   certification 4A0-M02   certification 4A0-M02   4A0-M02   certification 4A0-M02

NO.3 Which of the following statements is FALSE regarding the Tracking Area (TA)?
A. A TA is a set of eNodeBs that are defined by a UE itself.
B. A TA is the smallest geographical area in which a UE can roam without performing a Tracking Area
Update (TAU) other than periodic TAU as required.
C. A Tracking Area Identity (TAI) is used to identify each tracking area.
D. The Tracking Area Identity (TAI) is assigned by the service provider.
E. One TA may be served by one or more than one MME.
Answer: A

Alcatel-Lucent   4A0-M02   4A0-M02   4A0-M02

NO.4 In a 3G network, which of the following is used to build a PDP context between a UE and the GGSN
when a direct tunnel is not used?
A. An end-to-end GTP tunnel between the UE and the GGSN.
B. A Radio Access Bearer between the UE and the NodeB and a GTP tunnel between the NodeB and the
GGSN.
C. A Radio Access Bearer between the UE and the SGSN and a GTP tunnel between the SGSN and the
GGSN.
D. A Radio Access Bearer between the UE and the SGSN.
E. None of the above answers are correct.
Answer: C

Alcatel-Lucent examen   4A0-M02 examen   4A0-M02 examen

NO.5 Which of the following interfaces is not using the GTP-C protocol?
A. The X2 interface.
B. The S1-U interface.
C. The S4 interface.
D. The S5 interface.
E. The SGi interface.
Answer: E

Alcatel-Lucent examen   4A0-M02   4A0-M02   4A0-M02

NO.6 Based on the information shown in the exhibit, when the SGW receives an IP packet from the UE,
which of the following is the GTP TEID value expected to be received in the GTP packet header?
A. 0xd05025
B. 0x4b00805
C. 0x21
D. 0x4b00825
E. None of the above answers are correct.
Answer: D

certification Alcatel-Lucent   4A0-M02   4A0-M02 examen   4A0-M02   4A0-M02 examen

NO.7 Which of the following LTE interfaces are used for the communication of user data? (Choose one best
answer)
A. The S1-MME interface and the S11 interface.
B. The S1-U interface.
C. The S5 interface.
D. The S1-U interface, the S5 interface and the LTE-Uu interface.
E. Only answers A, B and C are correct.
F. Only answers B and C are correct.
Answer: D

certification Alcatel-Lucent   4A0-M02   4A0-M02 examen   4A0-M02   4A0-M02 examen

NO.8 Which of the following statements is FALSE regarding the EPS bearers?
A. The default bearer isinitiatedby either the UE or the PCRF.
B. The default bearer is always the first bearer established to an APN.
C. An AF server may initiate adedicatedbearer to a UE.
D. EPS bearers that connect a given UE to a single PGW may use different IP subnets.
E. The default bearer remains active throughout the lifetime of the APN connection.
Answer: A

Alcatel-Lucent   4A0-M02 examen   4A0-M02   certification 4A0-M02   4A0-M02 examen   certification 4A0-M02

NO.9 Which of the following statements is TRUE regarding the IP connectivity between a UE and a PDN?
A. A UE gets an IPv4 address and/or an IPv6 prefix per APN.
B. A PGW forwards the UE's IP packets to the PDN based on the address of the PDN server.
C. When a UE sends an IP packet to a PDN over the EPC core, the eNodeB forwards
theencapsulatedpacket to the SGW by looking into its IP routing table to determine how to reach the PDN
server.
D. The SGW forwards the UE's IP packets to the PGW based on the address of the PDN server.
E. Only answers C and D are correct.
F. Only answers A and B are correct.
Answer: F

Alcatel-Lucent examen   certification 4A0-M02   4A0-M02   4A0-M02   4A0-M02

NO.10 Which of the following most accurately identifies a GTP tunnel on the Alcatel-Lucent 7750 MG by
default?
A. ATEID
B. The System IP address
C. A UDP port number
D. ATEIDand the System IP address
E. ATEID, the System IP address and a UDP port number
Answer: E

certification Alcatel-Lucent   certification 4A0-M02   certification 4A0-M02

NO.11 A UE needs to get an IP address before it can communicate to any PDN over the LTE network. Which of
the following statements are FALSE regarding the process of the IP address allocation? (Choose two)
A. A PGW may obtain an IP address from a RADIUS server and assign it to the UE.
B. A PGW may assign the IP address from its local address pools.
C. An SGW may obtain a static IP address from the HSS server and assign it to the UE.
D. An SGW may obtain an IP address from a RADIUS server and assign it to the UE.
E. A PGW may obtain an IP address from a DHCP server and assign it to the UE.
Answer: C,D

Alcatel-Lucent examen   certification 4A0-M02   certification 4A0-M02   certification 4A0-M02   4A0-M02 examen

NO.12 An Alcatel-Lucent SGW is only connected to an Alcatel-Lucent PGW. Based on the information shown
in the exhibit, how many GTP-C tunnels are established between the SGW and the PGW?
A. 1
B. 2
C. 3
D. 4
E. 6
Answer: E

Alcatel-Lucent examen   4A0-M02   4A0-M02 examen   4A0-M02

NO.13 Which of the following statements is FALSE regarding the eNodeB?
A. The eNodeBs maybeinterconnectTEIDwith each other via anX2 interface.
B. The eNodeB is an element of the EPC core.
C. The eNodeBs areconnectedto the EPC core via the S1 interface.
D. During an IMSI attach, the eNodeB selects an MME to service the UE.
E. The eNodeB performs the compression and encryption of the user data stream.
Answer: B

Alcatel-Lucent examen   certification 4A0-M02   4A0-M02

NO.14 There is an active GTP path between an Alcatel-Lucent SGW and an Alcatel-Lucent PGW, On the
SGW. Which of the following CLI commands is used to check the "Restart Count" value of the PGW?
A. show mobile-gateway serving ref-point-peers s5
B. show mobile-gateway serving ref-point-stats s5
C. show mobile-gateway serving bearer-stats s5
D. show mobile-gateway serving path-mgmt-stats s5
E. None of the above answers are correct.
Answer: D

certification Alcatel-Lucent   4A0-M02   4A0-M02   certification 4A0-M02

NO.15 Which of the following statements is FALSE regarding the UE paging process?
A. The SGW performs downlink data buffering while the S1 bearer is being established.
B. The SGW initiates the paging messages towards the UE.
C. The PGW is not aware of the paging process.
D. The UE initiates the service request procedure once it receives the paging message.
E. The paging procedure is controlled by the MME.
Answer: B

Alcatel-Lucent examen   4A0-M02   certification 4A0-M02   4A0-M02   4A0-M02 examen

NO.16 Which of the following statements most accurately describes the Diameter protocol?
A. The Diameter is a peer-to-peer protocol that uses the TCP or SCTP as the transport protocol.
B. A Diameter peer could act as a Diameter client or a Diameter server to its remote peer.
C. The Alcatel-Lucent 7750 PGW acts as a Diameter client to the PCRF server via the Gx interface.
D. The Diameter protocol uses TCP and SCTP port number 3868.
E. All of the above answers are correct.
F. Only answers A and B are correct.
Answer: E

Alcatel-Lucent   4A0-M02   4A0-M02 examen   4A0-M02

NO.17 Based on the information shown in the exhibit, which of the following is the PLMN ID?
A. 302
B. 720
C. 123456789
D. 9876543
E. 30201613
F. 302720
Answer: F

certification Alcatel-Lucent   4A0-M02 examen   4A0-M02   certification 4A0-M02

NO.18 Which of the following statements is FALSE regarding the UE network attachment procedure?
A. The UE is served by an eNodeB.
B. The eNodeB selects one MME to serve the UE.
C. The MME selects one SGW to serve the UE.
D. The SGW selects one PGW to serve the UE
E. The PGW selects one PCRF server if required.
Answer: D

Alcatel-Lucent   4A0-M02   4A0-M02   4A0-M02   4A0-M02

NO.19 The S5 is the interface used for the communication between the SGW and the PGW. Which of the
following transport protocols is used by this interface?
A. GTP/TCP
B. GTP/UDP
C. GTP/IP
D. GTP/SCTP
E. None of the above answers are correct
Answer: B

certification Alcatel-Lucent   4A0-M02   certification 4A0-M02   certification 4A0-M02   4A0-M02   certification 4A0-M02

NO.20 Which of the following most accurately describes the messages used to manage a Diameter
connection path?
A. The Capabilities-Exchange message
B. The Device-Watchdog message
C. The Credit-Control message
D. The Disconnect-Peer message
E. All of the above answers are correct
F. Only answers A, B and D are correct
Answer: F

Alcatel-Lucent   4A0-M02 examen   certification 4A0-M02   certification 4A0-M02   certification 4A0-M02

Pass4Test peut vous fournir un raccourci à passer le test Alcatel-Lucent 4A0-M02: moins de temps et efforts dépensés. Vous trouverez les bonnes documentations de se former dans le site Pass4Test qui peut vous aider efficacement à réussir le test Alcatel-Lucent 4A0-M02. Si vous voyez les documentations dans les autres sites, c'est pas difficile à trouver qu''elles sont venues de Pass4Test, parce que lesquelles dans Pass4Test sont le plus complété et la mise à jour plus vite.

Dernières Alcatel-Lucent 4A0-M02 examen pratique questions et réponses

Si vous traviallez dur encore pour préparer le test de Alcatel-Lucent 4A0-M02 et réaliser votre but plus vite, Pass4Test peut vous donner une solution plus pratique. Choisir la Q&As de Pass4Test qui vous assure que c'est pas un rêve à réussir le test Alcatel-Lucent 4A0-M02.

Les produits de Pass4Test sont recherchés par les experts de Pass4Test qui se profitent de leurs connaissances et leurs expériences dans l'Idustrie IT. Si vous allez participer le test Alcatel-Lucent 4A0-M02, vous devez choisir Pass4Test. La Q&A de Pass4Test peut vous aider à préparer mieux le test Alcatel-Lucent 4A0-M02 avec sa grande couiverture des questions. En face d'un test très difficile, vous pouvez obtenir le Certificat Alcatel-Lucent 4A0-M02 sans aucune doute.

4A0-M02 est un test de Alcatel-Lucent Certification, donc réussir 4A0-M02 est le premier pas à mettre le pied sur la Certifiction Alcatel-Lucent. Ça peut expliquer certiainement pourquoi le test Alcatel-Lucent 4A0-M02 devient de plus en plus chaud, et il y a de plus en plus de gens qui veulent participer le test 4A0-M02. Au contraire, il n'y a que pas beaucoup de gens qui pourrait réussir ce test. Dans ce cas, si vous vous réfléchissez étudier avec une bonne Q&A?

Pass4Test est un fournisseur important de résume du test Certification IT dans tous les fournissurs. Les experts de Pass4Test travaillent sans arrêt juste pour augmenter la qualité de l'outil formation et vous aider à économiser le temps et l'argent. D'ailleur, le servie en ligne après vendre est toujours disponible pour vous.

Pass4Test est un seul site web qui peut offrir toutes les documentations de test Alcatel-Lucent 4A0-M02. Ce ne sera pas un problème à réussir le test Alcatel-Lucent 4A0-M02 si vous préparez le test avec notre guide d'étude.

Vous pouvez télécharger le démo gratuit pour prendre un essai. Vous aurez plus confiance sur Pass4Test. N'hésitez plus à choisir la Q&A Alcatel-Lucent 4A0-M02 comme votre guide d'étude.

Code d'Examen: 4A0-M02
Nom d'Examen: Alcatel-Lucent (Alcatel-Lucent Mobile Gateways for the LTE Evolved Packet Core )
Questions et réponses: 140 Q&As

Dans ce monde d'informatique, l'industrie IT est suivi par de plus en plus de ges. Dans ce domaine demandant beaucoup de techniques, il faut des Certificat à se preuver les techniques professionnelle. Les Certificats IT sont improtant pour un interviewé pendant un entretien. C'est pas facile à passer le test Alcatel-Lucent 4A0-M02, donc c'est pourquoi beaucoup de professionnels qui choisissent ce Certificat pour se preuver.

4A0-M02 Démo gratuit à télécharger: http://www.pass4test.fr/4A0-M02.html

NO.1 Which of the following statements most accurately describes the MME?
A. The MME selects the SGW and the PGW for a given UE.
B. The MME is responsible for the bearer management.
C. The MME communicates with both the E-UTRAN and the EPC via GTP-C tunnels.
D. The MME performs the user authentication and authorization using the information provided by the
HSS
E. All of the above answers are correct.
F. Only answers A, B and D are correct.
Answer: F

Alcatel-Lucent examen   4A0-M02   certification 4A0-M02   4A0-M02   certification 4A0-M02   4A0-M02

NO.2 A UE needs to get an IP address before it can communicate to any PDN over the LTE network. Which of
the following statements are FALSE regarding the process of the IP address allocation? (Choose two)
A. A PGW may obtain an IP address from a RADIUS server and assign it to the UE.
B. A PGW may assign the IP address from its local address pools.
C. An SGW may obtain a static IP address from the HSS server and assign it to the UE.
D. An SGW may obtain an IP address from a RADIUS server and assign it to the UE.
E. A PGW may obtain an IP address from a DHCP server and assign it to the UE.
Answer: C,D

Alcatel-Lucent   4A0-M02 examen   4A0-M02

NO.3 Which of the following statements is FALSE regarding the eNodeB?
A. The eNodeBs maybeinterconnectTEIDwith each other via anX2 interface.
B. The eNodeB is an element of the EPC core.
C. The eNodeBs areconnectedto the EPC core via the S1 interface.
D. During an IMSI attach, the eNodeB selects an MME to service the UE.
E. The eNodeB performs the compression and encryption of the user data stream.
Answer: B

Alcatel-Lucent   4A0-M02   4A0-M02 examen   4A0-M02 examen

NO.4 The S5 is the interface used for the communication between the SGW and the PGW. Which of the
following transport protocols is used by this interface?
A. GTP/TCP
B. GTP/UDP
C. GTP/IP
D. GTP/SCTP
E. None of the above answers are correct
Answer: B

Alcatel-Lucent   4A0-M02   4A0-M02   4A0-M02   4A0-M02 examen

NO.5 Based on the information shown in the exhibit, which of the following is the PLMN ID?
A. 302
B. 720
C. 123456789
D. 9876543
E. 30201613
F. 302720
Answer: F

certification Alcatel-Lucent   4A0-M02 examen   certification 4A0-M02

NO.6 Which of the following statements is FALSE regarding the UE paging process?
A. The SGW performs downlink data buffering while the S1 bearer is being established.
B. The SGW initiates the paging messages towards the UE.
C. The PGW is not aware of the paging process.
D. The UE initiates the service request procedure once it receives the paging message.
E. The paging procedure is controlled by the MME.
Answer: B

Alcatel-Lucent   certification 4A0-M02   4A0-M02

NO.7 An Alcatel-Lucent SGW is only connected to an Alcatel-Lucent PGW. Based on the information shown
in the exhibit, how many GTP-C tunnels are established between the SGW and the PGW?
A. 1
B. 2
C. 3
D. 4
E. 6
Answer: E

Alcatel-Lucent   certification 4A0-M02   4A0-M02   4A0-M02   4A0-M02 examen   4A0-M02 examen

NO.8 Which of the following statements most accurately describes the Diameter protocol?
A. The Diameter is a peer-to-peer protocol that uses the TCP or SCTP as the transport protocol.
B. A Diameter peer could act as a Diameter client or a Diameter server to its remote peer.
C. The Alcatel-Lucent 7750 PGW acts as a Diameter client to the PCRF server via the Gx interface.
D. The Diameter protocol uses TCP and SCTP port number 3868.
E. All of the above answers are correct.
F. Only answers A and B are correct.
Answer: E

Alcatel-Lucent examen   certification 4A0-M02   4A0-M02 examen

NO.9 In a 3G network, which of the following is used to build a PDP context between a UE and the GGSN
when a direct tunnel is not used?
A. An end-to-end GTP tunnel between the UE and the GGSN.
B. A Radio Access Bearer between the UE and the NodeB and a GTP tunnel between the NodeB and the
GGSN.
C. A Radio Access Bearer between the UE and the SGSN and a GTP tunnel between the SGSN and the
GGSN.
D. A Radio Access Bearer between the UE and the SGSN.
E. None of the above answers are correct.
Answer: C

certification Alcatel-Lucent   4A0-M02   4A0-M02

NO.10 Which of the following most accurately describes the messages used to manage a Diameter
connection path?
A. The Capabilities-Exchange message
B. The Device-Watchdog message
C. The Credit-Control message
D. The Disconnect-Peer message
E. All of the above answers are correct
F. Only answers A, B and D are correct
Answer: F

certification Alcatel-Lucent   4A0-M02 examen   4A0-M02 examen

NO.11 Which of the following statements is FALSE regarding the Tracking Area (TA)?
A. A TA is a set of eNodeBs that are defined by a UE itself.
B. A TA is the smallest geographical area in which a UE can roam without performing a Tracking Area
Update (TAU) other than periodic TAU as required.
C. A Tracking Area Identity (TAI) is used to identify each tracking area.
D. The Tracking Area Identity (TAI) is assigned by the service provider.
E. One TA may be served by one or more than one MME.
Answer: A

Alcatel-Lucent   4A0-M02 examen   certification 4A0-M02   4A0-M02

NO.12 Which of the following statements is FALSE regarding the UE network attachment procedure?
A. The UE is served by an eNodeB.
B. The eNodeB selects one MME to serve the UE.
C. The MME selects one SGW to serve the UE.
D. The SGW selects one PGW to serve the UE
E. The PGW selects one PCRF server if required.
Answer: D

Alcatel-Lucent   4A0-M02 examen   4A0-M02   4A0-M02 examen   4A0-M02 examen

NO.13 Which of the following interfaces is not using the GTP-C protocol?
A. The X2 interface.
B. The S1-U interface.
C. The S4 interface.
D. The S5 interface.
E. The SGi interface.
Answer: E

Alcatel-Lucent examen   certification 4A0-M02   certification 4A0-M02

NO.14 Which of the following LTE interfaces are used for the communication of user data? (Choose one best
answer)
A. The S1-MME interface and the S11 interface.
B. The S1-U interface.
C. The S5 interface.
D. The S1-U interface, the S5 interface and the LTE-Uu interface.
E. Only answers A, B and C are correct.
F. Only answers B and C are correct.
Answer: D

Alcatel-Lucent   4A0-M02 examen   certification 4A0-M02

NO.15 Which of the following statements is FALSE regarding the S1-MME interface?
A. It is the control plane interface between the E-UTRAN and the MME.
B. It is used to signal the TEIDs for the S1 bearers between the eNodeB and the SGW.
C. The eNodeB receives the Paging messages over the S1-MME interface.
D. It is used for the management of the Radio Access Bearers.
E. It is based on the IP/UDP protocols.
Answer: E

certification Alcatel-Lucent   4A0-M02   4A0-M02 examen   4A0-M02

NO.16 Which of the following statements is TRUE regarding the IP connectivity between a UE and a PDN?
A. A UE gets an IPv4 address and/or an IPv6 prefix per APN.
B. A PGW forwards the UE's IP packets to the PDN based on the address of the PDN server.
C. When a UE sends an IP packet to a PDN over the EPC core, the eNodeB forwards
theencapsulatedpacket to the SGW by looking into its IP routing table to determine how to reach the PDN
server.
D. The SGW forwards the UE's IP packets to the PGW based on the address of the PDN server.
E. Only answers C and D are correct.
F. Only answers A and B are correct.
Answer: F

certification Alcatel-Lucent   4A0-M02   certification 4A0-M02   4A0-M02   4A0-M02

NO.17 Which of the following statements is FALSE regarding the EPS bearers?
A. The default bearer isinitiatedby either the UE or the PCRF.
B. The default bearer is always the first bearer established to an APN.
C. An AF server may initiate adedicatedbearer to a UE.
D. EPS bearers that connect a given UE to a single PGW may use different IP subnets.
E. The default bearer remains active throughout the lifetime of the APN connection.
Answer: A

Alcatel-Lucent   4A0-M02   4A0-M02

NO.18 Which of the following most accurately identifies a GTP tunnel on the Alcatel-Lucent 7750 MG by
default?
A. ATEID
B. The System IP address
C. A UDP port number
D. ATEIDand the System IP address
E. ATEID, the System IP address and a UDP port number
Answer: E

Alcatel-Lucent   4A0-M02 examen   certification 4A0-M02   4A0-M02 examen   4A0-M02

NO.19 Based on the information shown in the exhibit, when the SGW receives an IP packet from the UE,
which of the following is the GTP TEID value expected to be received in the GTP packet header?
A. 0xd05025
B. 0x4b00805
C. 0x21
D. 0x4b00825
E. None of the above answers are correct.
Answer: D

Alcatel-Lucent   4A0-M02   certification 4A0-M02   4A0-M02

NO.20 There is an active GTP path between an Alcatel-Lucent SGW and an Alcatel-Lucent PGW, On the
SGW. Which of the following CLI commands is used to check the "Restart Count" value of the PGW?
A. show mobile-gateway serving ref-point-peers s5
B. show mobile-gateway serving ref-point-stats s5
C. show mobile-gateway serving bearer-stats s5
D. show mobile-gateway serving path-mgmt-stats s5
E. None of the above answers are correct.
Answer: D

Alcatel-Lucent   certification 4A0-M02   4A0-M02 examen   4A0-M02   4A0-M02 examen   4A0-M02

Si vous êtes intéressé par l'outil formation Alcatel-Lucent 4A0-M02 étudié par Pass4Test, vous pouvez télécharger tout d'abord le démo. Le service de la mise à jour gratuite pendant un an est aussi offert pour vous.