Pass4Test vous promet de vous aider à passer le test Tibco TB0-116, vous pouvez télécharger maintenant les Q&As partielles de test Tibco TB0-116 en ligne. Il y a encore la mise à jour gratuite pendant un an pour vous. Si vous malheureusement rater le test, votre argent sera 100% rendu.
Ajoutez le produit de Pass4Test au panier, vous pouvez participer le test avec une 100% confiance. Bénéficiez du succès de test Tibco TB0-116 par une seule fois, vous n'aurez pas aucune raison à refuser.
Aujoud'hui, c'est une société de l'informatique. Beaucoup d'organisations peut provider l'outil de se former pour le test Certification Tibco TB0-116. Mais on doit admettre que ces site n'ont pas la capacité à offrir une bonne Q&A, elles sont généralement très vagues et sans les points. C'est loin d'attirer les attentions des candidats.
Code d'Examen: TB0-116
Nom d'Examen: Tibco (TIBCO Enterprise Message Service 6 Exam)
Questions et réponses: 134 Q&As
Pour vous laisser savoir mieux que la Q&A Tibco TB0-116 produit par Pass4Test est persuadante, le démo de Q&A Tibco TB0-116 est gratuit à télécharger. Sous l'aide de Pass4Test, vous pouvez non seulement passer le test à la première fois, mais aussi économiser vos temps et efforts. Vous allez trouver les questions presque même que lesquels dans le test réel. C'est pourquoi tous les candidats peuvent réussir le test Tibco TB0-116 sans aucune doute. C'est aussi un symbole d'un meilleur demain de votre carrière.
TB0-116 Démo gratuit à télécharger: http://www.pass4test.fr/TB0-116.html
NO.1 What are two valid TIBCO EMS Administrator Tool commands? (Choose two.)
A. set server ft=enabled
B. set server routing=enabled
C. set server authorization=enabled
D. set serverdetailed_statistics=NONE
Answer: C,D
certification Tibco TB0-116 TB0-116 TB0-116
NO.2 The mismatched bandwidth between a message producer and consumer can be solved by setting
which property in the TIBCO EMS configuration?
A. multicast
B. flow_control
C. msg_swapping
D. max_msg_memory
Answer: A
Tibco examen TB0-116 examen TB0-116 examen certification TB0-116 TB0-116
NO.3 What are two allowed connection factory types with TIBCO EMS?
A. both
B. xaboth
C. generic
D. xageneric
Answer: C,D
certification Tibco TB0-116 TB0-116 certification TB0-116
NO.4 A connection factory is configured as follows: url=tcp://A:7222,tcp://B:7222
connect_attempt_count=2 reconnect_attempt_count=4 Host A is not available. After the client connects to
host B, host B crashes and remains down. How many more times will the client try to connect with host A?
A. 0
B. 1
C. 2
D. 4
E. 6
F. 8
Answer: D
certification Tibco TB0-116 TB0-116
NO.5 A TIBCO EMS Server has the following configuration in the stores.conf and queues.conf
files:stores.conf
[filestore-1] type=file file=filestore1.db mode=async
[filestore-2] type=file file=filestore2.db mode=sync queues.conf > store=filestore-1 queue1
store=filestore-2 Message swapping is enabled.
What happens when NON_PERSISTENT messages are published on queue1?
A. All the published messages are stored in filestore-2.
B. All the published messages are stored in filestore-1.
C. Messages are moved to filestore-1 when the server reaches certain memory limits.
D. Messages are moved to filestore-2 when the server reaches certain memory limits.
Answer: D
Tibco examen TB0-116 certification TB0-116 certification TB0-116
NO.6 Which three message delivery modes are valid for TIBCO EMS? (Choose three.)
A. PERSISTANT
B. NON_PERSISTENT
C. RELIABLE_DELIVERY
D. CERTIFIED_DELIVERY
Answer: A,B,D
Tibco certification TB0-116 TB0-116 examen TB0-116 examen certification TB0-116
NO.7 Given the configuration in the acl.conf file: TOPIC=topic.sample1 USER=Bob PERM=subscribe
TOPIC=topic.* Group=engineering PERM=publish,subscribe Which statement is true if Bob is a member
of the engineering group?
A. Bob can only subscribe to topic.sample1.
B. Bob can publish and subscribe to only topic.sample1.
C. Bob can publish and subscribe to both topic.sample1 and topic.sample2.
D. Bob can publish to only topic.sample2 but can subscribe to both topic.sample1 and
topic.sample2.
E. Bob can publish to only topic.sample1 but can subscribe to both topic.sample1 and
topic.sample2.
Answer: C
Tibco examen TB0-116 examen TB0-116
NO.8 Server R defines a global queue named Q1. R is also the owner of Q1. Servers P and S define routed
queues Q1@R. The servers P, R, and S are connected by routes. Which two statements are true?
(Choose two.)
A. When a message is sent from server P to queue Q1, P forwards the message to the home queue on
server R.
B. Messages are available to local and remote consumers even before the message reaches the home
queue.
C. If Server P or the route connection from P to R fails, a consumer application of server P will not be able
to receive messages from Q1 until the servers resume communication.
D. When a message is sent from server S to Q1 and the route is not connected, the message is not
delivered, and the client application receives the exception DESTINATION_NOT_AVAILABLE.
Answer: A,C
Tibco examen TB0-116 certification TB0-116
NO.9 What action is taken when the command purge all queues foo.* is sent on the TIBCO EMS
Administrator Tool?
A. All messages in all queues are deleted.
B. All messages present in the queue called foo.* are deleted.
C. All user-created queues whose names match the pattern foo.* are deleted.
D. All messages present in all the queues whose names matched the pattern foo.* are deleted.
Answer: D
Tibco TB0-116 TB0-116 TB0-116
NO.10 Which two statements are true about a fault-tolerant configuration of TIBCO EMS where the primary
server heartbeat has stopped? (Choose two.)
A. The backup server waits for its activation interval.
B. The backup server tries to retrieve the information from shared storage.
C. The backup server assumes control if theft_weight parameter is equal to 1.
D. Ifft_activation = ft_heartbeat x 5, the backup server becomes the primary server.
E. Theserver_timeout_server_connection parameter is used by the backup server before
attempting a switchover.
Answer: A,B
Tibco TB0-116 certification TB0-116 certification TB0-116
NO.11 Which three statements are true about using Third-Party JNDI Naming/Directory Services with TIBCO
EMS? (Choose three.)
A. Destinations cannot be retrieved from third-party naming or directory services.
B. To use a third-party directory service, you must have a JNDI provider for that specific type of service.
C. For third-party services, the only prerequisite is that the objects must have previously been stored
there.
D. EMS supports the storage and retrieval ofConnectionFactories in third-party naming or directory
services.
E. The objects physically stored by EMS coming from a third-party naming/directory service are serialized
objects.
F. The synchronization of administered objects between the EMS Server and the foreign
naming/directory services is automatic.
Answer: B,C,D
Tibco certification TB0-116 TB0-116 TB0-116
NO.12 Which two sets of commands successfully create a queue connection factory called fact with the URL
pointing to localhost:7222 on the TIBCO EMS Server? (Choose two.)
A. create factory fact queue
addprop factory fact url=tcp://7222
setprop factory fact url
B. create factory fact queueurl=tcp://7222
C. create factory queue fact
setprop factory fact url=tcp://localhost7222
D. create factory fact queue
addprop factory fact url=tcp://localhost:7222
E. create factory fact queue
addprop factory fact url=tcp://localhost:7222
setprop factory fact url
Answer: B,D
Tibco examen TB0-116 TB0-116
NO.13 Which operations ensure that the user usr gets permission to only subscribe to a topic tpc and browse
the queue que?
A. add memberusr grp
grant queue que grp browse
grant topic tpc usr subscribe
B. add membergrp usr
grant queue que usr browse
grant topic tpc grp subscribe
C. add memberusr grp
grant queue que usr browse
grant topic tpc usr subscribe
D. add membergrp usr
grant queue que usr browse
grant topic tpc grp subscribe,publish
Answer: B
Tibco TB0-116 TB0-116 TB0-116 examen
NO.14 Which two statements are true about access control and bridges? (Choose two.)
A. A bridge automatically has permission to send to its target destination(s).
B. Message producers must have access to a destination to send messages to that destination.
C. ACLs must be added to thebridges.conf file if the access control is enabled for any bridged destination.
D. A message producer sending messages to a bridged destination must also have access to the target
destination(s) defined on the bridge.
Answer: A,B
certification Tibco TB0-116 TB0-116 examen certification TB0-116
NO.15 What are two valid queue properties? (Choose two.)
A. export
B. channel
C. exclusive
D. maxRedelivery
Answer: A,B
certification Tibco TB0-116 certification TB0-116 TB0-116 TB0-116
NO.16 A TIBCO EMS Server (mystore) has the following configuration in the stores.conf and queues.conf
files: stores.conf [mystore] type=file file=mystore.db mode=sync [mystore] type=dbstore
dbstore_driver_url=jdbc:sqlserver://sqlsrv_1:3415;databaseName=sysmeta
dbstore_driver_username=admin dbstore_driver_password=admin123 queues.conf queue1
store=mystore Which statement is true when PERSISTENT messages are published to queue1?
A. The server decides at runtime which store to use.
B. The server picks themystore of file type because it was configured first.
C. The server fails to start because there are two stores configured with the same name.
D. The server picks themystore of database type because that overrides the previously configured
filestore.
Answer: C
certification Tibco TB0-116 examen TB0-116 TB0-116
NO.17 The following diagram illustrates an enterprise with one-hop zones connecting all the servers in each of
several cities in a fully-connected graph. Zone TK connects all the servers in Tokyo; zone NY connects all
the servers in New York; zone PA connects all the servers in Paris. In addition, the multi-hop zone WO
connects one server in each city. Which three statements are true when a client of server TK3 produces a
message? (Choose three.)
A. When the message reaches PA1, it crosses into zone PA.
B. When the message reaches TK1, it will cross into zone PA.
C. TK1 forwards the message to NY1, which in turn forwards it to PA1.
D. The message will travel one hop to each of the other Tokyo servers.
Answer: A,C,D
Tibco TB0-116 certification TB0-116 TB0-116 certification TB0-116
NO.18 Which two statements are true about JMS local transactions? (Choose two.)
A. Closing a transacted session commits its transaction.
B. Session interface provides commit and rollback methods.
C. Consumed messages are acknowledged uponsession.commit.
D. Consumed messages are recovered and redelivered uponsession.commit.
Answer: B,C
Tibco examen TB0-116 TB0-116
NO.19 Which two mappings of JMS header fields to TIBCO Rendezvous data types are correct? (Choose
two.)
A. JMSType to TIBRVMSG_U8
B. JMSTimestamp to TIBRVMSG_U64
C. JMSDeliveryMode to TIBRVMSG_U8
D. JMSRedelivered to TIBRVMSG_STRING
Answer: A,D
Tibco examen certification TB0-116 TB0-116
NO.20 Given the following set of values: ?sess is a Session object ?dest is a Destination object ?nolocal is a
boolean variable What is the correct way to create a message consumer with a selector?
A. String selector = "JMSCorrelationID=3";
MessageConsumer consumer = sess.createConsumer(dest,selector,nolocal);
B. String selector = "JMSCorrelationID='3'";
MessageConsumer consumer = sess.createConsumer(dest,selector,nolocal);
C. String selector = "JMSCorrelationID='3'";
MessageConsumer consumer = sess.createConsumer(dest, nolocal, selector);
D. String selector = " 'JMSCorrelationID'='3'";
MessageConsumer consumer = sess.createConsumer(dest, selector, nolocal);
Answer: B
Tibco examen TB0-116 TB0-116
Pour l'instant, vous pouvez télécharger le démo gratuit de Q&A Tibco TB0-116 dans Pass4Test pour se former avant le test Tibco TB0-116.
没有评论:
发表评论