Le succès n'est pas loin de vous si vous choisissez Pass4Test. Vous allez obtenir le Certificat de Cisco 642-732 très tôt. Pass4Test peut vous permettre à réussir 100% le test Cisco 642-732, de plus, un an de service en ligne après vendre est aussi gratuit pour vous.
Pass4Test a de formations plus nouvelles pour le test Cisco 642-732. Les experts dans l'industrie IT de Pass4Test profitant leurs expériences et connaissances professionnelles à lancer les Q&As plus chaudes pour faciliter la préparation du test Cisco 642-732 à tous les candidats qui nous choisissent. L'importance de Certification Cisco 642-732 est de plus en plus claire, c'est aussi pourquoi il y a de plus en plus de gens qui ont envie de participer ce test. Parmi tous ces candidats, pas mal de gens ont réussi grâce à Pass4Test. Ces feedbacks peuvent bien prouver nos produits essentiels pour votre réussite de test Certification.
Dans cette société bien intense, c'est avantage si quelque'un a une technique particulère, donc c'est pourquoi beaucoup de gens ont envie de dépnenser les efforts et le temps à préparer le test Cisco 642-732, mais ils ne peuvaient pas réussir finalement. C'est juste parce que ils ont pas bien choisi une bonne formation. L'outil de formation lancé par les experts de Pass4Test vous permet à passer le test Cisco 642-732 coûtant un peu d'argent.
Si vous choisissez notre l'outil formation, Pass4Test peut vous assurer le succès 100% du test Cisco 642-732. Votre argent sera tout rendu si vous échouez le test.
Le test Cisco 642-732 est le premier pas pour promouvoir dans l'Industrie IT, mais aussi la seule rue ramenée au pic de succès. Le test Cisco 642-732 joue un rôle très important dans cette industrie. Et aussi, Pass4Test est un chaînon inevitable pour réussir le test sans aucune doute.
Vous aurez le service de la mise à jour gratuite pendant un an une fois que vous achetez le produit de Pass4Test. Vous pouvez recevoir les notes immédiatement à propos de aucun changement dans le test ou la nouvelle Q&A sortie. Pass4Test permet tous les clients à réussir le test Cisco 642-732 à la première fois.
Quand vous hésitez même à choisir Pass4Test, le démo gratuit dans le site Pass4Test est disponible pour vous à essayer avant d'acheter. Nos démos vous feront confiant à choisir Pass4Test. Pass4Test est votre meilleur choix à passer l'examen de Certification Cisco 642-732, et aussi une meilleure assurance du succès du test 642-732. Vous choisissez Pass4Test, vous choisissez le succès.
Code d'Examen: 642-732
Nom d'Examen: Cisco (Conducting Cisco Unified Wireless Site Survey (CUWSS) v2.0)
Questions et réponses: 110 Q&As
642-732 Démo gratuit à télécharger: http://www.pass4test.fr/642-732.html
NO.1 You are working with a client that owns a six-story building in Charlotte, N.C. They occupy the bottom
three floors, and currently have a wired LAN. They have contacted you to perform a WLAN site survey of
their facility. Which three issues do you need to take into consideration before performing the site survey?
(Choose three.)
A. How many other organizations occupy the building?
B. Does the customer facility have a multistory atrium or lobby?
C. Protocol type required, client types in place, and client density?
D. Is WLAN coverage required in the elevators?
E. How many equipment closets do they have per floor and does the infrastructure all run back to a
central location?
F. How much signal bleedthrough is permissible between floors?
G. How much WLAN experience does the customer IT staff have?
Answer: B,C,D
Cisco examen 642-732 examen 642-732 examen 642-732
NO.2 Which option allows the maximum 2.4-GHz channel usage for a survey and data deployment in the
ETSI domain?
A. 1, 6, 11
B. 1, 5, 9, 13
C. 1, 6, 9, 14
D. 1, 6, 11, 14
Answer: B
Cisco examen certification 642-732 642-732 642-732 642-732 certification 642-732
NO.3 Which two issues do access and backhaul radios experience in mesh networks? (Choose two.)
A. The access radio has to connect to two or several points.
B. The access cell usually covers more area at ground level that may have more sources of reflection and
interference.
C. The access cell radio range is larger than the backhaul radio range, which causes the backhaul cell
radio to suffer from more interference.
D. Backhaul radios are a bottleneck for throughput.
E. RAPs help MAPs avoid coverage holes.
Answer: B,D
Cisco 642-732 642-732 examen
NO.4 Which three statements describe WLAN RF interaction with environmental situations? (Choose three.)
A. Outdoor rain or indoor humidity affects diffraction.
B. Outdoor rain or indoor humidity affects attenuation.
C. RF frequency is inversely related to attenuation.
D. RF frequency is directly related to attenuation.
E. The human body affects diffusion.
F. The human body affects attenuation.
Answer: B,D,F
Cisco 642-732 642-732 examen 642-732 examen
NO.5 The customer had a 802.11b/g WLAN site survey and installation two years ago with the final service
performing as expected. Since that time, the customer has experienced modest customer growth while
maintaining employee headcount. New wireless applications are being evaluated along with a possible
temporary headcount increase, but the current WLAN performance has noticeable performance
degradation. What is the most likely cause of the WLAN performance problems.?
A. They have added a second microwave to the break room.
B. A new coffee shop with a wireless hotspot has opened across the street.
C. The customer has expanded their shipping capacity by 50%.
D. Employees are now using their smart phones and tablets in the office.
Answer: D
Cisco 642-732 642-732 examen 642-732 examen 642-732 examen
NO.6 What is the recommended method to protect a wireless outdoor bridge from lightning?
A. Install the wireless outdoor bridge in a grounded NEMA enclosure.
B. Install the wireless outdoor bridge inside a building if possible and only have the antenna outside.
C. Install a fiber-optic link between the wireless outdoor bridge and the antenna.
D. Install a one-meter segment of fiber-optic cable with a copper-to-fiber-optic transceiver to isolate the
wireless outdoor bridge from the network cable plant.
E. Install a protection frame in the copper portion of the network cable plant to act as a lighting arrestor.
Answer: D
Cisco examen 642-732 642-732 examen 642-732
NO.7 Which wireless tool would be most useful in planning a WLAN solution prior to performing a site
survey?
A. Ekahau Survey
B. Air Magnet Survey
C. Air Magnet Wi-Fi Analyzer
D. Cisco Spectrum Expert
E. Cisco WCS
Answer: E
Cisco 642-732 642-732 642-732 examen 642-732 examen
NO.8 When planning to perform a customer WLAN site survey, which three components and tasks should be
considered? (Choose three.)
A. Schedule a meeting with the customer to discuss the Statement of Work
B. Complete the Pre-Survey Customer Questionnaire
C. Schedule customer end user interviews
D. Consider travel, access, and equipment requirements necessary to perform the site survey
E. Schedule initial customer meeting and pre-survey walkthrough events
F. Determine radiospectrum and channel allocation
G. Determine AP and controller placement
H. Determinecustomer training requirements
Answer: B,D,E
Cisco 642-732 examen certification 642-732
NO.9 During the site survey kick-off meeting with your customer, they ask why you need to verify the existing
network infrastructure. Which two reasons do you give them? (Choose two.)
A. You need to verify the make, model, and software versions of all the equipment that will connect to the
WLAN components in order to ensure compatibility.
B. You need to verify that the equipment the WLAN components will connect to has sufficient memory
capacity to support the additional WLAN connections.
C. You need to verify that there are sufficient switch ports to support the new WLAN connections.
D. You need to verify that the switches the WLAN components will connect to can supply 802.3af inline
power, and that they have sufficient ports to support all the new WLAN devices.
E. Depending on the type of APs that are planned for, the deployment may require different types of PoE
to be supplied by the LAB switches.
Answer: C,D
Cisco 642-732 examen 642-732 examen
NO.10 An initial meeting has been scheduled for a proposed site survey of a customer headquarters location.
Which four types of information would be valuable to collect prior to the formal kickoff meeting? (Choose
four.)
A. Site type (urban, suburban, external environmental sensitivity, etc.)
B. Business type
C. Number of years in business
D. Number of customers
E. Products and services produced
F. Building type
G. Plans for branch expansion
H. Number of branch locations
Answer: A,B,E,F
Cisco 642-732 examen 642-732 certification 642-732
NO.11 Which three components and tasks should be considered while planning the site survey? (Choose
three.)
A. Determine the project scope, type of deployment, timeline, scale, budget, and users
B. Determine project stakeholders
C. Determine customer training requirements
D. Determine AP and controller placement
E. Determine the customer applications that the network will support
F. Determine radiospectrum and channel allocation
G. Schedule customer end user interviews
Answer: A,B,E
Cisco 642-732 642-732 642-732
NO.12 The customer has an existing 802.11b/g network with Cisco 2500 controllers. The customer would like
to migrate to an 802.11a/b/g/n WLAN. Which network infrastructure issue might impact client performance
in this proposed controller-based solution?
A. The additional application load placed on servers by 802.11n clients.
B. A bottleneck may occur if the access switch port to the AP only supports 100 Mb/s full duplex.
C. The additional load placed on a RADIUS server by 802.1X authentication traffic on the first work day of
each week.
D. The added delay WDS imposes on the client when they roam from one AP to another.
Answer: B
Cisco 642-732 certification 642-732 642-732
NO.13 You have a multinational customer that would like you to perform a wireless site survey for a new
manufacturing facility in Singapore. They have had a local vendor install a point-to-point wireless bridge
link between two buildings 1 km apart. The ground between the buildings is flat but because facilities are
in the mountains, dense fog is an issue. There are no line of sight issues between the buildings. The link
is experiencing errors and throughput issues. Currently the two radios are set to operate at 2.4 GHz and
the transmit power is set to 7 dBm with 7 dBm antennas. What do you need to take into consideration
when performing the site survey for this link?
A. Change the radio power to 17 dBm.
B. Change the radio power to 20 dBm and replace with a 16 dBm antenna.
C. Change the radio power to 29 dBm.
D. Change the radio power to 13 dBm.
Answer: D
Cisco certification 642-732 642-732 examen 642-732
NO.14 You have been contacted by a medium-sized hospitality company that has 50 hotels. They would like to
upgrade their existing WLAN in each hotel to 802.11n. While performing the site surveys for each hotel,
what are the issues that you need to take into consideration when determining the locations for each AP?
A. Selecting AP locations where power is already available.
B. Selecting APs that can be hidden in ceiling panels to provide a secure and clean aesthetic look.
C. Selecting locations that are easily accessed so maintenance and upgrades can be performed quickly.
D. Selecting locations that make visual assessment of the AP operation easy.
Answer: B
Cisco examen 642-732 examen 642-732 examen
NO.15 After having the kick-off meeting for a new site survey project with your customer, which three factors
need to be considered prior to beginning a WLAN site survey? (Choose three.)
A. Will an additional trip to the facility to perform the initial walkthrough be required?
B. How much time should be allocated to survey the locations for the controllers?
C. Will any additional regulatory or safety training be required to complete the site survey?
D. Is access available to all areas of the customer facility where the WLAN is planned to be deployed?
E. Which types of controllers and switches will be required to fully conduct the site survey in all areas of
the customer facility?
F. Is access available to customer employees so that initial interviews can be performed?
Answer: A,C,D
Cisco certification 642-732 642-732 examen
Choisir le produit fait avec tous efforts des experts de Pass4Test vous permet à réussir 100% le test Certification IT. Le produit de Pass4Test est bien certifié par les spécialistes dans l'Industrie IT. La haute qualité du produit Pass4Test ne vous demande que 20 heures pour préparer, et vous allez réussir le test Cisco 642-732 à la première fois. Vous ne refuserez jamais pour le choix de Pass4Test, parce qu'il symbole le succès.
没有评论:
发表评论