C'est sûr que le Certificat HP HP0-Y12 puisse améliorer le lendemain de votre carrière. Parce que si vous pouvez passer le test HP HP0-Y12, c'est une meilleure preuve de vos connaissances professionnelles et de votre bonne capacité à être qualifié d'un bon boulot. Le Certificat HP HP0-Y12 peut bien tester la professionnalité de IT.
Le programme de formation HP HP0-Y12 offert par Pass4Test comprend les exercices et les test simulation. Vous voyez aussi les autres sites d'offrir l'outil de formation, mais c'est pas difficile à découvrir une grand écart de la qualité entre Pass4Test et les autres fournisseurs. Celui de Pass4Test est plus complet et convenable pour la préparation dans une courte terme.
Dans n'importe quelle industrie, tout le monde espère une meilleure occasion de se promouvoir, surtout dans l'industrie de IT. Les professionnelles dans l'industrie IT ont envie d'une plus grande space de se développer. Le Certificat HP HP0-Y12 peut réaliser ce rêve. Et Pass4Test peut vous aider à réussir le test HP HP0-Y12.
Code d'Examen: HP0-Y12
Nom d'Examen: HP (Building ProCurve Resilient, Adaptive Networks)
Questions et réponses: 116 Q&As
Si vous traviallez dur encore pour préparer le test de HP HP0-Y12 et réaliser votre but plus vite, Pass4Test peut vous donner une solution plus pratique. Choisir la Q&As de Pass4Test qui vous assure que c'est pas un rêve à réussir le test HP HP0-Y12.
HP0-Y12 Démo gratuit à télécharger: http://www.pass4test.fr/HP0-Y12.html
NO.1 You enter the following command at the CLI of a ProCurve Switch 3500yl:
3500.l(config)#ip route 22.0.0.0/8 172.16.100.100
However, when you enter show ip route to confirm your entry, no route to 22.0.0.0/8 appears in the route
table. Which
statement explains this condition?
A. The interface connected to 172.16.100.100 is down.
B. The switch has learned another route to 22.0.0.0/8 through OSPF.
C. The route table already includes a default route using 172.16.100.100.
D. The switch has not been configured with an IP address of 172.16.100.100.
Answer:A
HP certification HP0-Y12 HP0-Y12 examen HP0-Y12
NO.2 While analyzing network traffic, you notice that many packets have an 802.1p value of 0. On a
ProCurve switch with default QoS settings, what does this indicate?
A. No prioritization settings are in effect on the network.
B. The traffic will be mapped to the normal priority queue.
C. The network relies on Layer 3 classification technologies
D. The network is not using the default settings on ProCurve switches.
Answer: B
HP HP0-Y12 examen HP0-Y12 examen
NO.3 What is the difference between administrative distance and cost?
A. Administrative distance is applied only to routes learned through OSPF. Cost applies to RIP routes as
well as OSPF routes.
B. Administrative distance indicates the distance to remote networks learned through routing protocols.
Cost applies static routes and directly connected networks.
C. Administrative distance is determined solely through interactions among routers that share a routing
protocol. Cost can be defined by the administrator of each router.
D. Administrative distance is a locally significant value that can be used to break ties between routes
learned from different sources. Cost is a cumulative metric that indicates the number of hops to a remote
network.
Answer: D
HP examen HP0-Y12 HP0-Y12 examen
NO.4 Why does network congestion often cause more network congestion?
A. RSVP routers allocate more bandwidth to UDP applications.
B. TCP applications request retransmission of dropped packets.
C. QoS settings require switches to retransmit all real-time traffic.
D. 802.1p priorities are ignored after congestion reaches a user-defined threshold.
Answer: B
HP HP0-Y12 examen HP0-Y12
NO.5 When does an LLDP-enabled switch start sending LLDP advertisements?
A. when QoS is enabled
B. when IP multicast is enabled
C. immediately after it has started
D. when it receives an LLDP request from a neighbor
Answer: C
HP examen HP0-Y12 HP0-Y12 examen certification HP0-Y12 HP0-Y12
NO.6 You must design an IP addressing scheme for a network that must support 16 different types of users,
each with
different resource and security requirements. What is an advantage of ensuring that the number of
networks assigned to
each type of user is a power of 2?
A. It enables automatic summarization at classful boundaries.
B. It minimizes the number of VLANs required to support each type of user.
C. It ensures that an adequate number of IP addresses will be available for each type of user.
D. It simplifies summarization because all networks for each type of user can be summarized in a single
routing statement.
Answer: D
HP HP0-Y12 HP0-Y12 examen HP0-Y12 HP0-Y12
NO.7 What are the advantages of implementing IP routing technologies at the network edge? (Select two.)
A. provide per-user QoS
B. decrease the load on network core
C. eliminate the need for routing protocols
D. create smaller, localized broadcast domains
E. enhance support for default gateway redundancy
Answer: BD
HP HP0-Y12 certification HP0-Y12
NO.8 What is an advantage of locating routing intelligence at the edge of an enterprise network instead of in
the core?
A. The edge-oriented strategy requires fewer VLANs and networks.
B. The edge-oriented strategy supports VRRP and other protocols for default gateway redundancy.
C. The edge-oriented strategy enables ACLs and other traffic filters to be applied before traffic traverses
any part of the network.
D. The edge-oriented strategy simplifies summarization because each router must support VLANs only
for directly connected users.
Answer: C
HP certification HP0-Y12 HP0-Y12 examen
NO.9 By default, what type of route is redistributed in RIP updates by ProCurve ProVision ASIC switches?
A. static
B. default
C. OSPF
D. connected
Answer: D
HP examen HP0-Y12 certification HP0-Y12 HP0-Y12
NO.10 What is the role of an OSPF Area Border Router?
A. to connect multiple non-backbone areas
B. to connect a backbone area to non-backbone areas
C. to connect OSPF domains with domains that use other routing protocols
D. to connect a backbone area to the backbones of other OSPF routing domains
Answer: B
HP examen HP0-Y12 HP0-Y12 HP0-Y12 examen HP0-Y12 examen
NO.11 Under what condition does the IEEE 802.1p field provide end-to-end prioritization?
A. All switches can classify traffic based on DSCP.
B. Source and destination hosts are in the same VLAN.
C. The network is experiencing high levels of congestion.
D. All links in the path between source and destination are tagged.
Answer: D
HP examen certification HP0-Y12 HP0-Y12 examen HP0-Y12 examen HP0-Y12
NO.12 You will connect an IP telephone that supports LLDP-MED to port 8 on a ProCurve Switch 3500yl.
Which configuration step will enable the switch to auto-configure the appropriate VLAN for the phone??
A. Enable LLDP-MED in the VLAN 1 configuration context.
B. Configure port 8 as a tagged member of a voice VLAN.
C. Enable LLDP-MED in the configuration context for a voice VLAN.
D. Define port 8 as an LLDP-MED port in the global configuration context.
Answer: B
HP examen HP0-Y12 examen HP0-Y12 HP0-Y12 examen certification HP0-Y12 HP0-Y12
NO.13 When does a router use administrative distance to determine which route to include in its route table?
A. when the router learned about multiple routes with equal-cost paths to the same destination
B. when the router learned about multiple routes to the same destination from different sources using the
same routing protocol
C. when the router learned about multiple routes to the same destination from different routing protocols
or static configuration
D. when the router is configured with static routes to the same destination that specify the same cost but
different next hop router interfaces
Answer: C
HP examen HP0-Y12 examen certification HP0-Y12
NO.14 You must configure QoS on a ProCurve Switch 8212zl in the core layer of a network. One interface on
the switch receives traffic that uses only Layer 3 markers to indicate priority. What must you do to enable
the switch to forward this traffic with correct priority?
A. Set the QoS trust level to the appropriate value.
B. Enable the appropriate interpretation of the IP ToS field.
C. Configure port-based priorities for all ports forwarding this traffic.
D. Configure custom IEEE 802.1p maps for all ports forwarding this traffic.
Answer: B
HP examen HP0-Y12 examen HP0-Y12 examen HP0-Y12 HP0-Y12
NO.15 What is a difference between voice traffic and video traffic?
A. Voice traffic is typically more difficult to route than streaming video traffic.
B. Voice traffic is typically more sensitive to delay than streaming video traffic.
C. Voice traffic is typically less sensitive to jitter than streaming video traffic.
D. Voice traffic is typically more bandwidth-intensive than streaming video traffic.
Answer: B
HP HP0-Y12 examen HP0-Y12 HP0-Y12
NO.16 While analyzing network traffic using a port monitor on a ProCurve Switch 8212zl, you notice that
many packets have an 802.1p value of 1. If the switch has default QoS settings, what does this indicate?
A. The 8212zl has marked the traffic for low-priority forwarding.
B. The 8212zl has marked the traffic for high-priority forwarding.
C. Another device has marked the traffic for low-priority forwarding.
D. Another device has marked the traffic for high-priority forwarding.
Answer: C
HP HP0-Y12 examen HP0-Y12 HP0-Y12
NO.17 What is the effect when the following command is entered at the CLI of a ProCurve Switch 5406zl?
5406zl(vlan-111)#qos priority 2
A. Packets entering the switch through VLAN 111 will be forwarded with normal priority.
B. Packets entering the switch through VLAN 111 will be forwarded with lower than normal priority.
C. Packets entering the switch through VLAN 111 will be forwarded with higher than normal priority.
D. Packets entering the switch through VLAN 111 will retain the priority marker set by another device.
Answer: B
HP examen certification HP0-Y12 HP0-Y12 HP0-Y12 examen HP0-Y12
NO.18 Which condition is necessary to enable a group of networks to be auto-summarized by a ProCurve
Switch 3500yl?
A. The address ranges to be summarized must be within different OSPF areas.
B. The address ranges to be summarized must be within a classful network boundary.
C. The address ranges to be summarized must be directly connected to a neighbor router.
D. The address ranges to be summarized must be accessible through a neighbor router interface.
Answer: B
HP HP0-Y12 examen HP0-Y12 examen
NO.19 How many priority levels are specified by the IEEE 802.1p standard?
A. 4
B. 7
C. 8 D. 16
Answer: C
HP examen HP0-Y12 HP0-Y12 HP0-Y12 examen
NO.20 You must determine if the default settings on ProCurve 5406zl switches will provide adequate QoS for
a multimedia training application. What must you learn about the application in order to make this
determination?
A. if it recognizes IGMP joins from receivers
B. if it uses TCP or UDP as a transport protocol
C. if it inserts Layer 2 or Layer 3 priority markers
D. if it supports Guaranteed Minimum Bandwidth
Answer: C
HP certification HP0-Y12 HP0-Y12
Le produit de Pass4Test que vous choisissez vous met le pied sur la première marche du pic de l'Industrie IT, et vous serez plus proche de votre rêve. Les matériaux offerts par Pass4Test peut non seulement vous aider à réussir le test HP HP0-Y12, mais encore vous aider à se renforcer les connaissances professionnelles. Le service de la mise à jour pendant un an est aussi gratuit pour vous.
没有评论:
发表评论