Si vous traviallez dur encore pour préparer le test de IBM A2010-574 et réaliser votre but plus vite, Pass4Test peut vous donner une solution plus pratique. Choisir la Q&As de Pass4Test qui vous assure que c'est pas un rêve à réussir le test IBM A2010-574.
Beaucoup de gens trouvent difficile à passer le test IBM A2010-574, c'est juste parce que ils n'ont pas bien choisi une bonne Q&A. Vous penserez que le test IBM A2010-574 n'est pas du tout autant dur que l'imaginer. Le produit de Pass4Test non seulement comprend les Q&As qui sont impressionnées par sa grande couverture des Questions, mais aussi le service en ligne et le service après vendre.
Pass4Test est un site de vous ramener au succès. Pass4Test peut vous aider à promouvoir les connaissances essentielles pour le test IBM A2010-574 et passer le test à la première fois.
Le Certificat de IBM A2010-574 peut vous aider à monter un autre degré de votre carrière, même que votre niveau de vie sera amélioré. Avoir un Certificat IBM A2010-574, c'est-à-dire avoir une grande fortune. Le Certificat IBM A2010-574 peut bien tester des connaissances professionnelles IT. La Q&A IBM A2010-574 plus nouvelle vient de sortir qui peut vous aider à faciilter le cours de test préparation. Notre Q&A comprend les meilleurs exercices, test simulation et les réponses.
Pass4Test, où vous pouvez trouver les conseils et les documentations de test Certification IBM A2010-574, est un siteweb remarquable offrant les données à préparer le test IT. Les documentations partiels et les mis en nouveau sont offerts gratuitement dans le site de Pass4Test. D'ailleurs, nos experts profitent de leurs expériences et leurs efforts à lancer sans arrêts les Q&A plus proches au test réel. Vous allez passer votre examen plus facile.
Code d'Examen: A2010-574
Nom d'Examen: IBM (Assess: IBM Tivoli Business Service Manager V6.1 Implementation)
Questions et réponses: 129 Q&As
Vous pouvez télécharger tout d'abord une partie de Q&A Certification IBM A2010-574 pour tester si Pass4Test est vraiment professionnel. Nous pouvons vous aider à réussir 100% le test IBM A2010-574. Si malheureusement, vous ratez le test, votre argent sera 100% rendu.
A2010-574 Démo gratuit à télécharger: http://www.pass4test.fr/A2010-574.html
NO.1 During a Data Collector install, what would cause the application server you are monitoring to fail?
A. PMI being turned off
B. Managing Server not running
C. Virtual Frame Buffer not running
D. an error in the generic JVM arguments
Answer: D
IBM A2010-574 certification A2010-574 A2010-574 A2010-574
NO.2 Which three actions help in troubleshooting when a Data Collector fails to join the Managing Server
after installation, even though the application server starts successfully? (Choose three.)
A. check the message dispatcher logs
B. confirm whether Virtual Frame Buffer is running
C. confirm that the Custom Service is checked to
tartup?FRQILUPWKDWWKH&XVWRP6HUYLFHLVFKHFNHGWR?WDUWXS
D. check the monitored application server's SystemOut.log
E. check the PMI settings in theWebSphere Admin Console
F. ping both ways from the Managing Server and the Data Collector server
Answer: C,D,F
IBM A2010-574 examen certification A2010-574
NO.3 During the WebSphere Studio Application Monitor V3.2 Managing Server GUI installation, you are
asked to select features to install. One feature is 'Create Local Database.' If you need to create the DB2
database after the installation, what script needs to be run?
A. setenv.sh
B. db2install.sh
C. ManagingServer.sh
D. db2createschema.sh
Answer: B
IBM A2010-574 A2010-574 A2010-574 examen
NO.4 On which operating system can a Data Collector be applied to a WebSphere server instance,
which includes all server regions on that instance?
A. AIX
B. z/OS
C. Solaris
D. Windows
Answer: B
IBM A2010-574 examen A2010-574 A2010-574 A2010-574
NO.5 In order to monitor composite transactions in z/OS environment using WebSphere Studio Application
Monitor, what must be done as part of Data Collector install? What needs to be running in order to be able
to collect correlation data for CICS and IMS Subsystems?
A. CYN1PROC
B. CYN1 Subsystem
C. CYN1PROC and RACF
D. CYN1PROC and CYN1 Subsystem
Answer: D
IBM examen A2010-574 A2010-574 A2010-574 A2010-574 A2010-574
NO.6 Click the Exhibit button.
From the messages shown, which action should be considered?
A. stop and start the Data Collector
B. reduce the batch size of the Archive Agent
C. stop and start the Kernel and Publish Servers
D. increase Maximum Method Records in the WSAM User Interface Managing Server System Properties
Answer: D
IBM A2010-574 examen A2010-574
NO.7 During the embedded DB2 installation, the install logs can be found in what directory?
A. /opt
B. /tmp
C. $AM_HOME/logs
D. $WAS_HOME/logs
Answer: B
certification IBM A2010-574 A2010-574 examen A2010-574 A2010-574
NO.8 Which change is made by the WebSphere Studio Application Monitoring V3.2 distributed Data
Collector installer (both GUI and silent)?
A. adding SMF support
B. adding a custom service called "AM Custom Service"
C. creating the user "amuser" in the base operating system
D. sourcing the database user's profile in the profile for the user "amuser"
Answer: B
IBM A2010-574 A2010-574 A2010-574
NO.9 To perform database maintenance, which script should be scheduled to run daily?
A. amctl.sh
B. wdctl.sh
C. run-stats-cmd.sh
D. the data trimmer script
Answer: C
IBM A2010-574 examen A2010-574 examen A2010-574
NO.10 Which of the following ports should be used when WebSphere Studio Application Monitor V3.2 Data
Collectors are being installed in a non-network deployment environment?
A. RMI port of the local admin server
B. HTTP port of the local admin server
C. the SOAP port of the local admin server
D. the bootstrap port of the local admin server
Answer: C
IBM certification A2010-574 A2010-574 examen
NO.11 What must you do when installing WebSphere Studio Application Monitor V3.2 Managing Server while
using a Network Deployment WebSphere environment?
A. use the default values provided (hostname, and port number 8880)
B. use the localWebSphere information (hostname, and port number)
C. use the Deployment Manager information (hostname, and port number)
D. clear the hostname and port number fields so that the installer can dynamically derive the correct
hostname and port number
Answer: C
IBM A2010-574 A2010-574 A2010-574 A2010-574 certification A2010-574
NO.12 Which is specific to Oracle and should be created and used when setting up the remote Oracle
database server for the WebSphere Studio Application Monitor V3.2 Management Server?
A. SID
B. database
C. JDBC driver path
D. database instance
Answer: A
IBM A2010-574 certification A2010-574
NO.13 If you want to trim all data up to 7 days ago, then daystokeep=7. For example, if today is December 18,
2006, and you specify daystokeep=7, the Data Trimmer will do which of the following?
A. delete all data up to December 12, 2006, inclusive
B. delete all data up to December 11, 2006, inclusive
C. delete all data up to December 10th, 2006, inclusive
D. need to know the time of day to calculate the window
Answer: C
IBM A2010-574 A2010-574 A2010-574
NO.14 When enabling PDF support on WebLogic for the Visualization Engine, which script needs to be
modified to include the correct classpaths?
A. klctl.sh
B. setenv.sh
C. am-start.sh
D. startServer.sh
Answer: D
certification IBM A2010-574 certification A2010-574 A2010-574 examen certification A2010-574
NO.15 What information is collected at trace Level 2? (Choose three.)
A. CPU information
B. method level trace
C. component level trace
D. last known class name
E. advanced request data
F. page swapping information
Answer: A,C,E
IBM certification A2010-574 certification A2010-574 A2010-574 examen
NO.16 Which Managing Server log(s) might help you discover problems with accessing the database?
A. am_ms.log
B. am_sam.log
C. am_ps1.log and am_ps2.log
D. am_aa1.log and am_aa2.log
Answer: D
certification IBM certification A2010-574 A2010-574 A2010-574 A2010-574
NO.17 For WebSphere Studio Application Monitor (WSAM) V3.2 Management Server with DB2 database to
start and function properly, what must you do to set up the DB2 environment before issuing the command
'sh am-start.sh'?
A. locate source the filesetup_env, which is located in the /etc/Tivoli directory
B. locate and source the file's db2profile, which is located in the WAS_HOME directory
C. locate and source the file db2profile, which is located in the WSAM_HOME directory
D. locate and source the file db2profile, which is located in the sqllib subdirectory of the DB2 home
directory
Answer: D
IBM A2010-574 examen A2010-574 examen A2010-574 A2010-574
NO.18 The Data Collector installation seems successful and the monitored application server starts
successfully. However, the Data Collector does not show up in the Unconfigured Data Collectors list.
Which log would show the most relevant information?
A. the WSAM User Interface Self-Diagnosis
B. the Managing Server's Archive Agent's log
C. the monitored application server'sSystemOut log
D. the Managing Server's Visualization Engine'sSystemOut log
Answer: C
IBM examen certification A2010-574 A2010-574 examen A2010-574
NO.19 Which of the following would allow you to display graphs and charts properly on the WebSphere Studio
Application Monitor (WSAM) V3.2 Managing Server Console?
A. in theWebSphere Administrative Console, go to Application Servers->server_wsam->Process
Definition->Java Virtual Machine->Custom Properties and set property java.awt.headless=true
B. in theWebSphere Administrative Console, go to Application Servers->server_wsam->Process
Definition->Java Virtual Machine->Custom Properties and set property java.awt.headless=false
C. n theWebSphere Administrative Console, go to Application Servers->server_wsam->Process
Definition->Java Virtual Machine->Custom Properties and set property java.awt.headless=xterm
D. in theWebSphere Administrative Console, go to Application Servers->server_wsam->Process
Definition->Java Virtual Machine->Custom Properties and set property
java.awt.headless=/usr/bin/X11
Answer: A
IBM examen A2010-574 certification A2010-574 certification A2010-574 A2010-574
NO.20 With WebSphere Studio Application Monitor V3.2, the database port must be provided. How can you
determine the port that is being used by the DB2 instance?
A. You use the b2 listdb2port command.
B. It is provided when the database is installed.
C. The port is discovered dynamically during the install.
D. You use the b2 getdbm cfg command or viewing /etc/services.
Answer: D
IBM A2010-574 examen A2010-574 A2010-574 A2010-574 A2010-574
Il y a beaucoup de gans ambitieux dansn l'Industrie IT. Pour monter à une autre hauteur dans la carrière, et être plus proche du pic de l'Industrie IT. On peut choisir le test IBM A2010-574 à se preuver. Mais le taux du succès et bien bas. Participer le test IBM A2010-574 est un choix intelligent. Dans l'Industrie IT de plus en plus intense, on doit trouver une façon à s'améliorer. Vous pouvez chercher plusieurs façons à vous aider pour réussir le test.
没有评论:
发表评论