Vous pouvez télécharger le démo gratuit pour prendre un essai. Vous aurez plus confiance sur Pass4Test. N'hésitez plus à choisir la Q&A Microsoft 70-664 comme votre guide d'étude.
Les produits de Pass4Test a une bonne qualité, et la fréquence de la mise à jour est bien impressionnée. Si vous avez déjà choisi la Q&A de Pass4Test, vous n'aurez pas le problème à réussir le test Microsoft 70-664.
Code d'Examen: 70-664
Nom d'Examen: Microsoft (TS: Microsoft Lync Server 2010, Configuring)
Questions et réponses: 80 Q&As
La partie plus nouvelle de test Certification Microsoft 70-664 est disponible à télécharger gratuitement dans le site de Pass4Test. Les exercices de Pass4Test sont bien proches de test réel Microsoft 70-664. En comparaison les Q&As dans les autres sites, vous trouverez que les nôtres sont beaucoup plus complets. Les Q&As de Pass4Test sont tout recherchés par les experts de Pass4Test, y compris le test simulation.
Ajoutez le produit de Pass4Test au panier, vous pouvez participer le test avec une 100% confiance. Bénéficiez du succès de test Microsoft 70-664 par une seule fois, vous n'aurez pas aucune raison à refuser.
70-664 Démo gratuit à télécharger: http://www.pass4test.fr/70-664.html
NO.1 Your company has a country code of 1 and an area code of 425.
The network has a Lync Server 2010 infrastructure that uses Enterprise Voice.
You plan to create a normalization rule to normalize seven-digit numbers to E.164 format.
You need to identify the appropriate translation rule for the normalization rule.
Which translation rule should you identify?
A. +1$1
B. +1425
C. +1425$1
D. $111425
Answer: C
Microsoft 70-664 70-664 examen certification 70-664 70-664
NO.2 Your network has Lync Server 2010 deployed.
You deploy dial-in conferencing.
You need to provide the dial-in conferencing information to all the users on the network.
What should you run?
A. lcscmd /server /action:broadcastmessage
B. ocsumutil /ou:users
C. the New-CsAnnouncement cmdlet
D. the Set-CsPinSendCAWelcomeMail cmdlet
Answer: D
Microsoft 70-664 certification 70-664
NO.3 Your network has a Lync Server 2010 infrastructure that has a bandwidth policy.
You need to override the bandwidth policy for a user named User1.
What should you do first.?
A. Create a Dial Plan.
B. Create a Voice Policy.
C. Create a Client Policy.
D. Create a Conferencing Policy.
Answer: B
certification Microsoft certification 70-664 70-664 70-664 examen
NO.4 Your network has a Lync Server 2010 infrastructure that uses Enterprise Voice.
You need to enable call park for Enterprise Voice users.
You configure a call park number range.
What should you do next?
A. From the Lync Server 2010 Control Panel, edit the Voice Policy.
B. From the Lync Server 2010 Topology Builder, edit the Site settings.
C. From the Lync Management Shell, run the Set-CsCpsConfiguration cmdlet.
D. From the Lync Management Shell, run the Set-CsVoiceConfiguration cmdlet.
Answer: C
Microsoft examen 70-664 70-664 70-664 examen
NO.5 Your network has Lync Server 2010 deployed.
You configure Call Admission Control.
You need to enable Call Admission Control.
Which cmdlet should you run?
A. Set-CsBandwidthPolicyServiceConfiguration.
B. Set-CsMediaConfiguration.
C. Set-CsNetworkConfiguration.
D. Set-CsNetworkInterSitePolicy.
Answer: C
certification Microsoft 70-664 70-664 examen
NO.6 Your network has a Lync Server 2010 infrastructure that contains three servers. The servers are
configured as shown in the following table.
Server2 and Server3 are in a Mediation pool.
You plan to temporarily remove Server2 from the network.
You need to prevent new voice calls from being routed to Server2.
The solution must not disconnect calls in progress.
What should you do?
A. From the Lync Server 2010 Control Panel, modify the status of Server2.
B. From the Lync Server 2010 Control Panel, modify the Voice Routing settings.
C. From the Lync Server 2010 Topology Builder, edit the properties of the PSTN gateway.
D. From the Lync Server 2010 Topology Builder, edit the properties of the Mediation pool.
Answer: A
Microsoft certification 70-664 certification 70-664 certification 70-664
NO.7 Your network has Lync Server 2010 deployed.
You deploy a Mediation Server, and then you configure a voice route that uses a SIP trunk.
You create a test user named User1.
You enable Enterprise Voice for User1.
You need to verify that when User1 initiates calls to external telephone numbers, the calls are routed
through the SIP trunk.
What should you run?
A. From the Lync server, run the Test-CSMCXPushNotification cmdlet.
B. From the Lync server, run the New-CsExUmContact cmdlet.
C. From the Lync server, use the Lync Logging Tool and analyze the trace with Snooper
D. From the Lync server, use the Lync Control Panel to test voice routing in the Voice Routing tab
Answer: D
Microsoft certification 70-664 certification 70-664 70-664
NO.8 Your network has Lync Server 2010 deployed.
You need to ensure that when users on the PSTN receive calls from users in your organization, the calls
display the telephone number +14255551212.
What should you do?
A. From the Lync Server Management Shell, run the Set-CsVoicePolicy cmdlet.
B. From the Lync Server Management Shell, run the Set-CsCpsConfiguration cmdlet.
C. From Lync Server 2010 Control Panel, edit the Route settings.
D. From Lync Server 2010 Control Panel, create a workflow for a Response Group.
Answer: C
Microsoft 70-664 certification 70-664 70-664 70-664
NO.9 Your company has a telephone number range of (425) 555-1200 to (425) 555-1299.
The country code is 1. The network has Lync Server 2010 deployed.
You need to create a normalization rule for four-digit extension dialing that normalizes extensions to E.164
format.
Which two tasks should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Set the translation rule to +1425555$1.
B. Set the translation rule to +142555512$1.
C. Set the translation pattern to match
没有评论:
发表评论